Readme File for the Windows Driver for
        HP DeskJet 1200C and HP PaintJet XL300.

***IMPORTANT*** This Windows driver (version 03.40) does NOT
support Windows 3.0. To get the best use of your printer we
recommend that you upgrade to Windows 3.1. 

Note: To print this file from Windows Notepad or Write you
      must copy it to your hard disk, and then open the copy
      on your hard disk.


Quick Installation from Windows
   -- This is the recommended procedure.

1.	Insert the driver disk into the A (or other) drive of
	your computer.
2.	In the Program Manager, select File and then Run...
3.	On the Command Line, type a:\install and click OK.
4.	Select the desired configuration in the Printer Driver Installer
	dialog and click Install.


Quick Installation from DOS (Windows not running)

1.	Insert the driver disk into the A (or other) drive of
	your computer.
2.	Type:    win a:\install.
3.	Select the desired configuration in the Printer Driver Installer
	dialog and click Install.


Manual Installation 
   -- Recommended for Asian Windows and network installations.

1.	Insert the driver disk into the A (or other) drive of
	your computer.
2.	In the Program Manager, select Main.
3.	In Main, select Control Panel.
4.	In Control Panel, select Printers.
5.	In the Printers dialog, click Add >>.
6.	Select the Install Unlisted or Updated Printer entry
	in the List of Printers and click Install.
7.	In the Install Driver dialog box, type A: (or other
	drive) and click OK.
8.	In the Add Unlisted or Updated Printer dialog box, select the 
	appropriate printer name and click OK.
9.	After the color maps have been built, check the Use Print
            Manager check box and click the Connect button.
10.	In the Connect dialog box, double click on the desired
	port, check the Fast Printing Direct to Port check
	box, 
            ****VERY IMPORTANT****
            change the Transmission Retry value to 900 and
	then click OK.


SCREEN FONTS FOR WINDOWS

Screen fonts are available that match those in your printer.  
You will be able to see on your computer screen exactly 
what your printed fonts will look like.

To get your copy of screen fonts for Windows,
call 1-303-353-7650.



ALDUS PERSUASION BITMAP PRINTING

Printing bitmaps (.tif, .pcx, ...) from Aldus Persuasion
produces incorrect output.  In order to repair this
problem, the ALDUS.INI file must be modified by adding the
following lines to the end of the file:

[HP PaintJet XL300]
color printer=1

[HP DeskJet 1200C]
color printer=1

[HP PCL5 Color Printer]
color printer=1

For more information on locating and modifying this file, please
contact Aldus Corporation Software Support.



CORELDRAW 3.0 REV. B SLOW PRINTING

To speed the printing of gradient filled objects in 
CorelDraw 3.0 Rev. B, add the following line to the [CDrawConfig]
section of the coreldrw.ini file:

UseClippingForFills=0

For more information on locating and modifying this file, please
contact Corel Corporation Software Support.


AMI PRO VERSION 3.0 PATTERN FILLS

To print objects with pattern fills correctly, add the following
line to the [AmiPro] section of the amipro.ini file located in
the Windows directory:

DefOptions1=2

For more information on modifying this file, please contact
Lotus Development Corporation Software Support.


PAGEMAKER 5.0 HIGH QUALITY OUTPUT

If pictures printed in the high quality mode appear to have faint
grids or lines through the image, than select the normal print
quality mode to correct the problem.

PRINTING DIFFERENCES BETWEEN DRIVERS AND PRINTERS

Drivers

This 3.40 driver contains new, improved color tables to enhance your printed
images. These color tables may cause color changes in images you created to
print under the 2.20 driver. If you prefer the colors from the 2.20 driver,
use the Manual Colors option to select the same settings that you used in the
2.20 driver.

Printers

Newer DeskJet 1200C printers have an enhanced halftoning algorithm built into
the printer. Thus, the halftoning pattern of graphics and images will differ
between some DeskJet 1200C printers.

Look at the Serial Number of your printer on the Self Test:
      If it begins with 
            USAxxxxxxx, you have an older DeskJet 1200C that uses cluster halftoning.

            USBxxxxxxx, you have a newer DeskJet 1200C with the enhanced halftoning.

If you use this 3.40 driver with both USA and USB printers, you will see
differences in halftoning. If you want exactly the same output from both an
older and a newer printer--use the Manual Colors option to choose the Cluster
halftone.