IMPORTANT PRINTER DRIVER INSTALLATION INSTRUCTIONS

                         HARVARD GRAPHICS VERSION 3.0
                            HP LASERJET 4P PRINTER


     INSTALLING AND SELECTING A PRINTER DRIVER

     After you have used the DRIVER4P program to install your printer
     driver, you need to use the steps listed below to select and
     configure the printer driver.

     SELECTING AND CONFIGURING A PRINTER DRIVER

     To select the HP LaserJet 4P printer driver you installed, start
     Harvard Graphics 3.0 and follow these steps:

     1.   At the [F6]- Main Menu, select [8]-Setup menu.

     2.   Select [5]-Printer 1 Setup Menu.

     3.   With the cursor highlighting the "Printer type" selection, press
          [F3]-Choices to see a list of printers.

     4.   Use the "arrow" keys to scroll through the list of printer
          drivers, highlight the "LaserJet 4P (HPGL/2)" printer driver,
          then press [Enter].

     5.   Press [Tab] to highlight "Output port," then press[F3]-Choices
          to list available ports.  Select the communications port your
          printer is using, then press [Enter].

     6.   Press [Tab] to highlight "Default paper size."  Press [F3]-
          Choices, select the appropriate paper size, then press [Enter].

     7.   Press [Tab] to highlight "Use Spooler."  Press [F3]-Choices,
          select "Yes" or "No," then press [Enter].

     __________

     Note   Setting "Use spooler" to "Yes" initiates the Harvard Graphics
            internal printer spooler which will allow you to return to
            work within Harvard Graphics sooner after printing.  If you
            select "No" for this option, you will have to wait until the
            entire print job has completed to continue working.

            If you are using another print spooler,(a hardware spooler or
            a software spooling utility, for example), you should select
            "No" for the "Use spooler" option.  Do not use the Harvard
            Graphics spooler while any other spooler is active.
     __________

     8.   Press [Tab] to highlight "Quality", press [F3]-(Choices),
          highlight High, Medium or Low print quality, then press [Enter].


                                      Harvard Graphics, Version 3.0      1



     9.   After making all selections, select [F10]-Continue, then press
          the "Esc" key to return to the F6-Main Menu.


     SOFTWARE PUBLISHING CORPORATION CUSTOMER SUPPORT

          Contact your Harvard Graphics dealer.

     NOTICE
     The information in this document is subject to change without notice.

     HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
     MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  Hewlett-
     Packard shall not be liable for errors contained herein or for
     incidental consequential damages in connection with the furnishing,
     performance, or use of this material.

     Copyright (c) 1992 by HEWLETT-PACKARD COMPANY.

     CompuServe(tm) is a U.S. trademark of CompuServe, Inc.



































                                      Harvard Graphics, Version 3.0      2