HOW TO INSTALL LOCAL CHARACTER SET SUPPORT FOR YOUR HP DESKJET PRINTER
   (2/9/95)
   ----------------------------------------------------------------------

   NOTE: To print this file, type   PRINT README.TXT
         at the DOS (A:>) prompt.  (The default [PRN]
         is LPT1.  IF you have connected the printer to
         another port, enter that port in the command line,
         for example, type   PRINT README.TXT > LPT2   for parallel 
         port 2).

   ======================================================================
   CONTENTS
   ======================================================================

   This disk contains custom data files for the HP DeskJet Control
   Panel for DOS that allow access to special character sets.  One of
   these special groups of character sets is included in the localized
   printers for certain countries.  

   The following groups of character sets are supported on this disk:

      Arabic   - HP Arabic 8, PC Arabic CP-864
      Baltic   - PC Latvian/Russian, PC Lithuanian/Russian, 
                 PC Lithuanian CP-772
      Cyrillic - ISO 8859/5 Latin/Cyrillic, PC Cyrillic CP-866
      Greek    - ISO 8859/7 Latin/Greek, PC-8 Greek
      Hebrew   - ISO 8859/8 Latin/Hebrew, PC Hebrew CP-862
      Thai     - TIS (TAPIC23)    

   Each group of character sets is in its own directory on the disk.

   You will only need the one file that supports your particular language.
   This file must match the character sets that are built in to your
   printer. If you are uncertain which character sets are built in to
   your printer, check for one of the following 3 letter codes located
   on the serial label on the back of your printer:

      Arabic      - ARB
      Cyrillic    - CYR
      Greek       - GRK
      Hebrew      - HBR
      Latvian     - LTV
      Lithuanian  - LIT
      Thai        - THA

   Please follow the directions below to install the correct file for
   your printer.

   ======================================================================
   INSTALLATION DIRECTIONS
   ======================================================================

   If you have not yet installed your printer software, please do so at
   this time.  Then do the following:

   Find the appropriate subdirectory on this disk that matches the 
   character sets in your printer.  Copy the file named SYMSETS.DAT from 
   this subdirectory to the C:\DESKJET directory.  Note that there are
   multiple files on this disk named SYMSETS.DAT, but you should only copy 
   the ONE file that matches your printer language set. 

   Example: to install support for Cyrillic character sets, first check for
            the CYR code on the printer's serial label.  Then, assuming
            this floppy disk is in the A: drive, type

            COPY A:\CYRILLIC\SYMSETS.DAT C:\DESKJET    {Enter}

   This will include the Cyrillic character sets as possible choices in
   the Character Set box in the HP DeskJet Control Panel for DOS.