======================================================================
  Microsoft(R) Product Support Services Application Note (Text File)
                DK0487: CORRECTED CANON BJ-10e DRIVER
======================================================================
                                                   Revision Date: 9/91
                                                         Disk Included

The following information applies to Microsoft Works for DOS version
2.0.
--------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an            |
| Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY      |
| KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO    |
| THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A     |
| PARTICULAR PURPOSE. The user assumes the entire risk as to the     |
| accuracy and the use of this Application Note. This Application    |
| Note may be copied and distributed subject to the following        |
| conditions: 1) All text must be copied without modification and    |
| all pages must be included; 2) If software is included, all files  |
| on the disk(s) must be copied without modification [the MS-DOS(R)  |
| utility DISKCOPY is appropriate for this purpose]; 3) All          |
| components of this Application Note must be distributed together;  |
| and 4) This Application Note may not be distributed for profit.    |
|                                                                    |
| Copyright 1991 Microsoft Corporation. All Rights Reserved.         |
| Microsoft, MS-DOS, and the Microsoft logo are registered           |
| trademarks of Microsoft Corporation.                               |
 --------------------------------------------------------------------

The disk included with this application note contains the file
CANONBJ1.PRD, an updated printer driver for the Canon BJ-10e printer.
This driver corrects a problem that occurs with the CANONBJE.PRD file
that causes the letters "CI" to spuriously print in the upper-left
corner of the first page of a document.

The updated CANONBJ1 driver should be installed and selected in place
of the CANONBJE driver.


INSTALLATION
============

Hard-Disk System
----------------

1. Place the enclosed disk in drive A. At the command prompt, type the
   following and press ENTER

      copy a:\canonbj1.prd <location>
    
   where <location> refers to the drive and directory that contains
   your Works program files (usually, C:\WORKS).

2. Start the application by typing "works" (without the quotation
   marks).

3. From the Print menu, choose Printer Setup.

4. In the Printers box, select CANONBJ1, and then choose OK.

Dual-Floppy-Disk System
-----------------------

1. Place the enclosed disk in drive B and the working copy of your
   Works program disk in drive A. At the command prompt, type the
   following and press ENTER:

      copy b:\canonbj1.prd a:\

2. Start the application by typing "works" (without the quotation
   marks).

3. From the Print menu, choose Printer Setup.

4. In the Printers box, select CANONBJ1, and then choose OK.


SUPPORTED FEATURES
==================

The Canon BJ-10e printer is supported by Works in its factory default
mode.

Graphics printing is supported at 60, 120, 180, and 300 dpi.

Bold and underline are available on all internal fonts on the Canon
BJ-10e. Underline is substituted for italics.


FONT SUPPORT WITH THE CANONBJE AND CANONBJ1 DRIVERS
===================================================

   Fonts         Sizes
   
   
   Courier       8, 10, 12, 14, 15, 16
   CourierLQ     8, 10, 12, 14, 15, 16
   CourierPS     12, 16
   Gothic        8, 10, 12, 14, 15, 16
   GothicLQ      8, 10, 12, 14, 15, 16
   GothicPS      12, 16