Ultra Update

Ultra Memory Requirements

To ensure that your Ultra adapter operates properly, eliminate all 
memory conflicts with installed devices by adding the following statements 
to the appropriate files before running EZStart:

USING MEMORY MANAGERS
If you use a memory manager such as EMM386, 386MAX, or QEMM,
add an EXCLUDE statement in your CONFIG.SYS file to
prevent your memory manager from using the area occupied by your
Ultra adapter. For example, if your adapter is going to use the factory
default RAM window of CC00-CFFF, the EXCLUDE statement for
EMM386 is:

DEVICE=C:\DOS\EMM386.EXE X=CC00-CFFF

If you use a different memory manager, refer to its user manual.

USING WINDOWS 3.x AND WINDOWS FOR WORKGROUPS 
Add an EMMEXCLUDE= statement to the [386 Enh] 
section in the SYSTEM.INI file to prevent Windows or Windows for Workgroups 
from using the area of memory occupied by your Ultra adapter. For 
example, if your adapter is going to use the factory default RAM window 
of CC00-CFFF, the EMMEXCLUDE= statement is: 

[386Enh] 
EMMEXCLUDE=CC00-CFFF

Ultra Driver for Microsoft Windows for Workgroups 3.11

The SMC driver shipped with Windows for Workgroups 
3.11 is not as current as the driver on your SMC SuperDisk. Use the 
driver on your SMC SuperDisk for Windows for Workgroups 3.11. 

1. MAKE YOUR SMC SuperDisk THE WINDOWS DRIVER-INSTALLATION 
DISK

With your SMC SuperDisk in drive A, use EZStart to copy 
the Microsoft Windows for Workgroups v3.11 (NDIS Driver) 
drivers from the Network Operating System Selection screen to A:\NDIS. 
Your SMC SuperDisk can now be used as the Windows driver-installation 
disk.

DO NOT select Microsoft Windows for Workgroups 
v3.1 (NDIS Driver) from EZStart. The Windows for Workgroups version 
3.1 driver is different than the  Windows for Workgroups version 3.11 
driver.

2. ADD THE UPDATED SMC DRIVER FROM THE DRIVER-INSTALLATION 
DISK

To install the updated SMC driver using the Windows driver-installation 
disk you created in step 1, select Add Adapter followed by Unlisted 
or Updated Network Adapter in the Windows for Workgroups Network 
Setup dialog box.