STANDARD MICROSYSTEMS CORPORATION

                 Wollongong PathWay Access v2.0 for DOS
                 For TokenCard EliteSeries LAN Adapters

                         INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
         Copyright (c) 1993 Standard Microsystems Corporation.
                         All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the Wollongong PathWay Access 
   version 2.0 for DOS NDIS driver files from the SuperDisk 
   to your PC.

o  How to prepare your PC's operating system so you can attach 
   to the network.

Note: This driver supports all SMC TokenCard EliteSeries 
      ISA and Micro Channel Token-Ring adapters.


COPYING THE DRIVER FILES

From the Driver Installation screen, select 'Copy Files' to copy all 
the files used by this driver from the SuperDisk to the Destination 
Directory recommended by EZStart, or to a different directory that you 
specify.


PREPARING YOUR OPERATING SYSTEM

Use the following steps to install the SMC8100 driver to support 
PathWay only:

1. Using any text editor, add the following three lines to your 
   CONFIG.SYS file:

          device=c:\pathway\pwtcp.sys
          device=c:\pathway\protman.exe/i:\<directory path>
          device=c:\lanman\SMC8100.dos

   In the above lines, "/i:\<directory path>" is optional and 
   specifies any valid directory containing PROTOCOL.INI (the 
   default directory is \LANMAN).

2. Create a PROTOCOL.INI file that contains the following lines:

        [Protocol Manager]
               DriverName = protman$

        [SMC8100-NIF]
               Drivename = SMC8100$

3. In your AUTOEXEC.BAT file, verify that you have a line similar
   to the following:

        NDIS -d:2

   In the above line, the number "2" indicates that the [SMC8100-NIF]
   section in the PROTOCOL.INI file is the second entry. If it was
   the first entry, the above line would read:

        NDIS -D"1

4. Proceed with the rest of the instructions in the Wollongong
   PathWay Installation Guide.


SMC and Standard Microsystems are registered trademarks; and 
TokenCard, TokenCard Elite, TokenCard Elite/A, Elite Series, 
EliteView, EZStart, and SuperDisk are trademarks of Standard 
Microsystems Corporation.  Other products and company names are 
registered trademarks or trademarks of their respective holders.