STANDARD MICROSYSTEMS CORPORATION

          Microsoft LAN Manager v2.x DOS Workstation Driver
                For TokenCard EliteSeries LAN Adapters

                         INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1993 Standard Microsystems Corporation.
                         All rights reserved.   


This installation guide describes:

o  How to use EZStart to copy the Microsoft LAN Manager DOS 
   workstation driver for version 2.0, 2.1, or 2.2 from the
   SuperDisk to your PC. 

o  How to install the Microsoft LAN Manager DOS workstation 
   driver for versions 2.0, 2.1, and 2.2. 


COPYING THE DRIVER FILES

From the EZStart Driver Installation screen, select 'Copy Files'
to copy all the files used by this driver from the SuperDisk to 
the Destination Directory recommended by EZStart, or to a different
directory that you specify.

The EZStart default Destination Directory is C:\MSLANMAN.DOS.
Please make a backup copy of your SuperDisk before EZStart copies
files to the SuperDisk to create an "option" diskette.


INSTALLING THE DRIVER

This procedure involves installing the driver using the SETUP 
program. Use these instructions as a supplement to those in your
LAN Manager manual. 


Version 2.0 OR 2.2

If you have version 2.0 or 2.2:

1. Run SETUP according to the instructions in the LAN Manager 
   manual.

2. When prompted, select "Other Driver". 

3. Insert the "options" diskette you created by using EZStart to 
   copy the driver. Then select the driver.

4. Proceed with the rest of the instructions in the LAN Manager 
   manual.


Version 2.1

If you have version 2.1:

1. Run the SETUP program according to the instructions in the LAN 
   Manager manual. 

2. When prompted to install the driver, select "Other Driver". 

3. Insert the "options" diskette you created by using EZStart to 
   copy the driver. Then select the driver.

4. Proceed with the instructions in the LAN Manager manual to 
   generate a PROTOCOL.INI file. 

5. After the driver is installed, use a text editor to add the
   following line to the [SMC8100] area of the PROTOCOL.INI file:

    [SMC8100]  
    DriverName=SMC8100$ 

6. Reboot your computer.

This completes the installation procedure.

Refer to the general installation document (NDIS.DOC) for
information on PROTOCOL.INI parameters.


SMC and Standard Microsystems are registered trademarks; and 
TokenCard, TokenCard Elite, TokenCard Elite/A, Elite Series, 
EliteView, EZStart, and SuperDisk are trademarks of Standard 
Microsystems Corporation.  Other products and company names are 
registered trademarks or trademarks of their respective holders.