STANDARD MICROSYSTEMS CORPORATION

                   FTP PC/TCP v1.2 Driver for OS/2
                For TokenCard EliteSeries LAN Adapters

                          INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1993 Standard Microsystems Corporation.
                         All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the FP PC/TCP version 1.2 for OS/2 
   driver files from the SuperDisk to your PC.
 
o  How to prepare your PC's operating system so you can attach 
   to the network.
 
Note: This driver supports all SMC TokenCard EliteSeries 
      ISA and Micro Channel Token-Ring adapters.


COPYING THE DRIVER FILES

From the Driver Installation screen, select 'Copy Files' to copy 
all the files used by this driver from the SuperDisk to the 
Destination Directory recommended by EZStart, or to a different 
directory that you specify.


PREPARING YOUR OPERATING SYSTEM

1. Use any text editor to modify your CONFIG.SYS file to include
   the following device statement for SMC8100.OS2:

   DEVICE=C:\PCTCP\DRV\SMC8100.OS2

2. Use any text editor to make the following changes to the 
   PROTOCOL.INI file created by FTP in the C:\PCTCP\DRV 
   subdirectory:

   [SOCKET]
       Drivername = $socket
       Bindings = SMC8100

   [SMC8100]
       Drivername = SMC8100$


The PC/TCP setup program, TCPINST, is located on the PC/TCP Install
Disk 1. The chapter entitled "Installing PC/TCP" in the PC/TCP 1.2
Installation Guide contains complete instructions for using TCPINST.


SMC and Standard Microsystems are registered trademarks; and 
TokenCard, TokenCard Elite, TokenCard Elite/A, Elite Series, 
EliteView, EZStart, and SuperDisk are trademarks of Standard 
Microsystems Corporation.  Other products and company names are 
registered trademarks or trademarks of their respective holders.