STANDARD MICROSYSTEMS CORPORATION SMC LAN ADAPTER SETUP PROGRAM RELEASE INFORMATION Version 1.22 July 31, 1996 VERSION HISTORY -- Version 1.22 (July 31, 1996) -- Current Release -- - Added option to toggle Address Mapping Mode between I/O Mapped Mode and Memory Mapped Mode for the 8416 B/T/A, -iomap:x and -memmap:x. - Fixed -default option for 8416T. -- Version 1.21 (Feb 03, 1995) - Add 3 options for PnP resource data string: -pnpdefault --- This option sets all PnP values to the default. This will enable PnP. -pnpdefault:max --- This option sets all PnP values to the MAXIMUM possible range of values that the board can tolerate. -pnpstatus --- This option displays the status of the PnP values of all adapters in the machine. - If -io:x option is used, ezsetup only searches the I/O address=x for adapter instead of searching the whole range (0x200-0x3e0). -- Version 1.20 (Dec 19, 1994) - Add 3 PnP options: -pnp:(I/O address) --- This option enables the PnP feature of the SMC adapter at I/O address = (I/O address). -pnpactv --- This option modifies the I/O address values in the PnP resource string for all SMC PnP adapters. The PnP adapters will remain PnP enabled. -nopnp --- This option disables the PnP feature on all SMC PnP adapters. -- Version 1.11 (Dec 13, 1994) - To update the PNP logic. -- Version 1.10 (Aug 05, 1994) - To support AMD (Auto-Media-Detect) feature. - To allow user to modify pnpboot bit which can activate the 8416 adapter as a normal adapter before PNP software activates it. Refer to the User Installation Guide for additional information. EtherCard PLUS, TokenCard, and SuperDisk are trademarks, and SMC and Standard Microsystems are registered trademarks of Standard Microsystems Corporation 1994-1996. Other trademarks mentioned herein belong to their respective companies.