NETWARE CLIENT 32 FOR WINDOWS 95



  To install SMC ODI LAN driver during Setup:
  1. Copy the driver to the \ENGLISH folder (or the install folder
      you created) before installing Client 32.

  To update a SMC LAN driver after installing Client 32:
  1. Do either of the following:
     * For 32-bit (*.LAN) drivers, copy the new driver to the client
       computer's NOVELL\CLIENT32 folder.
     * For a 16-bit (*.COM) driver, copy the new driver to the
        client computer's NOVELL\NWCLIENT folder.
  2. Follow the directions in the next section for installing
      third-party LAN drivers.

  3.  Installing 3rd-Party LAN Drivers

  If you want to use an ODI LAN driver from a vendor other than
  Novell, you need to specify the driver in the Client 32 Setup
  initialization file.

  If you have a newer driver than the one provided with the Client32
  release, copy all the files from the ENGLISH folder on the
  Client 32 CD-ROM to a Client 32 install folder on your hard
  disk or on a network drive and copy the driver to this install
  folder.

  To install a third-party ODI LAN driver:
  1. Before running Client 32 Setup, open NWSETUP.INI (in the
      install folder) in a text editor.
  2. Search for the .INF file that corresponds to LAN driver you want
      to use. The .INF files for third-party LAN drivers are named
      ODIxxxx.INF, where "xxxx" is the manufacturer of the network
      adapter. For example, ODISMC.INF.
  3. Delete the semicolon at the front of the line (DONE).
  4. Save your changes and exit the editor.
  5. Run Client 32 Setup.

  Do Not Remove Novell ODINSUP

  Do not remove Novell ODINSUP from the Network control panel,
  unless you know the ODI adapter it is bound to. Removing Novell
  ODINSUP also removes NetWare Client 32 for Windows 95 if
  there is only one adapter in use.