6/13/1995 SCO UNIX PnP Driver NDC ND5300 Installation ================================================== The following files will be used in this installation: Files Contents ----------- ----------------------------------------- readme.doc This file. driver.o NDC ND5300 PnP Driver Program setup Transfer dos format to unix format setup program info Used by netconfig init Used by netconfig master Used by netconfig node Used by netconfig reconf Used by netconfig remove Used by netconfig space.c Used by netconfig system Used by netconfig --------------------------------------------------------- 1. Login as root user. (On maintenance mode) 2. Installation Diskette in DOS format. Put ND5300 SCO UNIX Driver diskette to floppy A: and use doscp command to copy ND5300 SCO UNIX PnP Driver into UNIX's directories. # cd / # doscp A:setup /setup # chmod +x /setup # ./setup 4. Use netconfig utility (after SCO UNIX Release 3.2 V 4.2) Avaiable options: # netconfig 1) Add a chain 2) Remove a chain 3) Reconfigure an element in a chain 4) Quit Select 1. Add a chain 5. Select top level of chain to Add or q to quit: 4. sco_tcp (SCO TCP/IP for UNIX) 6. Select next level of chain to Add or q to quit: Select ND5300 PnP Family Ethernet Driver board 0 7. Add chain sco_tcp -> pnp0 (y/n) type 'y' 8. Enter the internet Address of this interface n.n.n.n 9. Enter the netmask for this interface (default 255.255.255.0) 10. Does the interface use a broadcast address of all 1's (y/n) default : y 11. Enter the boardcast address for this interface default: n.n.n.n 12. Are these values correct ? (y/n) y 13. Pseudo ttys are currently configured, do you want to: 1) Add Pseudo ttys 2) Remove Pseudo ttys Select an option or enter q to quit [q] q 14.Available options: 1) Add a chain 2) Remove a chain 3) Reconfigure a element in a chain q. Quit Select option: q 15. Do you want to relink to kernel now ? y 16. Do you want this kernel to boot by default (y/n) y 17. Do you want the kernel environment rebuilt (y/n) y 18. Reboot unix # shutdown -y -g0