NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for Microsoft Windows NT 3.1 / 3.5 / 3.51
=====================================================

   The following driver kit files are Copyright of National DataComm
   Corporation:

       NDIS.SYS
       OEMSETUP.INF
       ND5300.SYS

    +-------------------------------------------------------------------+
    |  ND5300 driver for Intel [tm] Windows NT [tm] 3.1 / 3.5 / 3.51    |
    +-------------------------------------------------------------------+

PRE-INSTALLATION

     You should setup and diagnose the Instant-Link adapter(s) by
     applying NDCONF3 before you install and/or run the NOS or
     network applications.


INSTALLATION PROCEDURE

   I. Installing the ND5300 driver for Windows NT [tm]
   -------------------------------------------------------

   1. Open the Windows NT [tm] Networks Control Program Applet (NCPA)
      from inside the Window Control Panel.

   2. Click [Add_Adapter]

   3. Select [<Other> Requires disk from the manufacturer]
      in the Add Network Adapter box

   4. Insert the "NDC Setup diskette" in the floppy drive

   5. Select your option
             [NDC ND5300 (PnP)]
      from the Select OEM Option box

   6. Modify the default distribution path in the Windows NT [tm]
      Setup box to point to the floppy drive if your floppy
      drive is not drive A: then click [Continue]

   7. For ND5300 options, a Dialog box pops up to select the:

      EtherID : If multiple ND5300 adapters are used in system,
                you must input it.

   8. Upon completion, one of the following adapters
             [ [n]NDC ND5300 (PnP) ]
      appears in the Installed Adapter Cards list of the
      Network Setting box (n is the adapter number).

   9. Click [Close] to complete the Network Setting
      initialization.

   10. To use the mini-port driver(ND5300.SYS) on WINDOWS NT 3.1,
       you must replace the original NDIS.SYS file with the NDIS.SYS
       file included in this directory.

        For example:

                > cd c:\winnt\system32\drivers
                > copy a:\winnt31\ndis.sys

            or

                > cd c:\winnt\system32\drivers
                > rename ndis.sys ndis.bak
                > copy a:\winnt31\ndis.sys

   11. Shutdown and reboot the system


   II. Installing multiple PnP boards
   -----------------------------------

      Repeat the procedure described in the previous paragraph.


NDC ND5300 Plug and Play Ethernet Adapter
NDIS Driver for Microsoft Windows NT 4.0
=============================================

PRE-INSTALLATION

     You should setup and diagnose the Instant-Link adapter(s) by
     applying NDCONF3 before you install and/or run the NOS or
     network applications.


INSTALLATION PROCEDURE

    1. Insert the adapter into an empty ISA slot and bring up Windows NT 4.0.

    2. Go to Control Panel in My Computer.  Double click the Network icon.

    3. Click the "Add" button in the Network box.

    4. Click the "Have disk" button in the Network Adapter box.

    5. Insert the ND5300 diskette into the floppy drive and enter
       the path:

             A:\WINNT35.

       Click "OK."

    6. The screen will show "NDC ND5300 (PnP)". Click "OK."

    7. Follow the on-screen instructions to complete the installation.

    8. Reboot the computer to allow the settings to take effect.