NDC ND5300 Plug and Play Ethernet Adapter NDIS Driver for IBM PC LAN Program Workstation Installation =========================================================== PRE-INSTALLATION You should setup and diagnose the Instant-Link adapter(s) by applying NDCONF3 before you install and/or run the NOS or network applications. INSTALLATION PROCEDURE 1) At the DOS prompt, insert the IBM LAN Support Program (LSP) Version 1.30 (or later) diskette. 2) Type: DXMAID 3) Press the key three times. The Environment Information screen appears. 4) Specify the following values for the fields on this screen: Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\lsp 5) Press to store your choices. The program prompts you to install the option diskette. 6) Insert the "NDC Setup diskette" in your source drive and specify the path: A:\LANSRV.DOS 7) Press . The necessary files are copied from the "NDC Setup diskette" to your target directory on your computer's hard disk. 8) Press three times. 9) Insert the LSP diskette and press . The "Current Configuration" screen appears with the "ND5300 Plug and Play Ethernet Adapter" and protocols already selected. 10) Press . LSP is installed. 11) Use any text editor to edit the CONFIG.SYS file. Specify at least 20 files in the FILES= line; for example: files=20 Once you save your CONFIG.SYS, reset your computer. 12) Insert the PC LAN Install Diskette. 13) Type: INSTALL 14) Press . 15) Press three more times. 16) Select the level of function for this workstation, either "Basic Services" or "Extended Services". Most of the time, select the second option. 17) Specify "Workstation". 18) Specify either "Send messages" or "Send, receive, and log messages" options. Most of the time, select the second option. 19) Specify the target path for the PC LAN files. The default pathname is C:\DOS. 20) Specify the machine's ID and the domain ID. The domain ID must be the domain server ID and must be the same for all workstations on the network. 21) Follow the prompts to complete the installation until you reach the "Change System Configuration File" screen. Usually, you should accept the default for the system configuration file. The "Change System Batch File" screen appears. Usually you should accept the default. NDC ND5300 Plug and Play Ethernet Adapter NDIS Driver for IBM PC LAN Program Server Installation ====================================================== PRE-INSTALLATION You should setup and diagnose the Instant-Link adapter(s) by applying NDCONF3 before you install and/or run the NOS or network applications. INSTALLATION PROCEDURE 1) At the DOS prompt, insert the IBM LAN Support Program (LSP) Version 1.30 (or later) diskette. 2) Type: DXMAID 3) Press the key three times. The Environment Information screen appears. 4) Specify the following values for the fields on this screen: Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\lsp 5) Press to store your choices. The program prompts you to install the option diskette. 6) Insert the "NDC Setup diskette" in your source drive and specify the path: A:\LANSRV.DOS. 7) Press . The necessary files are copied from the "NDC Setup diskette" to your target directory on your computer's hard disk. 8) Press three times. 9) Insert the LSP diskette and press . The "Current Configuration" screen appears with the "ND5300 Plug and Play Ethernet Adapter" and protocols already selected. 10) Press . LSP is installed. 11) Use any text editor to edit the CONFIG.SYS file. Specify at least 20 files in the FILES= line; for example: files=20 Once you save your CONFIG.SYS, reset your computer. 12) Insert the PC LAN Install Diskette in your computer's diskette drive. 13) Type: INSTALL 14) Press . 15) Press three more times. 16) Select the level of function for this workstation, either "Basic Services" or "Extended Services". Most of the time, select the second option. 17) Specify "Server". 18) Specify either "Send messages" or "Send, receive, and log messages" options. Most of the time, select the second option. 19) Specify the target path for the PC LAN files. The default pathname is C:\DOS. 20) Specify the machine's ID and the domain ID. The domain ID must be the domain server ID and must be the same for all workstations on the network. 21) Follow the prompts to complete the installation until you reach the "Change System Configuration File" screen. Usually, you should accept the default for the system configuration file. The "Change System Batch File" screen appears. Usually you should accept the default.