The Installation Procedure of NDC ND51XX PCMCIA on Windows NT3.51
-------------------------------------------------------------------

1. Plug the adapter (ND51XX) into an empty PCMCIA slot/socket.

2. Connect the network cable to the adapter.

3. Start up Windows NT3.51.

4. In the Main group, double click the Control Panel icon.

5. In the Control Panel group, double click the Network icon.

6. The Network Settings window will open.  Click the "Add Adapter" button.

7. In the Add Network Adapter window, select the "<Other> Requires disk
   from manufacturer" item from the list and click the "Continue" button.

8. Insert the "InstantLink PCMCIA/ND51XX" diskette into a floppy drive
   (e.g. A:) ==> Input the path (e.g. A:\WINNT\NT351) ==>Click "OK."

9. Follow the on-screen instructions to complete the Installation
   procedure.  (Insert the Windows NT 3.51 diskettes or CD ROM as requested.

10. Reboot your computer to allow the above changes to take effect.



Installation Procedure of the NDC ND51XX PCMCIA(Rev:A1) in Windows NT 4.0
-------------------------------------------------------------------------

1. Insert the ND51XX PCMCIA card into a slot and boot up Windows NT 4.0.

2. Go to Control Panel in My Computer. Double click the Network
   icon.

3. Select the Adapter tab in the Network box and click the "Add" button.

4. Click the "Have disk" button in the Select Network Adapter box.

5. Insert the ND51XX diskette into a floppy drive and input the driver
   path as:  a:\WINNT\NT40. Click "OK."

6. The screen will show "NDC ND5100 Ethernet PCMCIA LAN Adapter". Click "OK"
   to load the ND51XX driver.

7. In the Bus Type box select "PCMCIA."

8. Follow the on-screen instructions to complete the installation.

9. Reboot your notebook.

10. After bringing up NT 4.0, go to "Network" and select the "NDC ND5100 Ethernet
    PCMCIA LAN Adapter."  Click the "remove" button.

11. Repeat steps 2 to 6.

12. Set the IRQ and I/O Port Address for the ND51XX. Click "OK."

    Note: The IRQ and I/O port address settings must match the
          configuration that the "PC Card" assigned to the adapter.
          The "PC Card" is located in the "Control Panel" group.

13. When prompted for the Bus type, set the type as "ISA".

14. Follow the on-screen instructions to complete the installation.

15. Reboot the notebook.


Installation Procedure of the NDC ND51XX PCMCIA(REV:A2) in Windows NT 4.0
-------------------------------------------------------------------------

1. Insert the ND51XX PCMCIA card into a slot and boot up Windows NT 4.0.

2. Go to Control Panel in My Computer.  Double click the Network
   icon.

3. Select the "Adapter" tab in the Network box and click the "Add" button.

4. Click the "Have disk" button in the "Select Network Adpater" box.

5. Insert the ND51XX diskette into a floppy drive and input the driver
   path as:  a:\WINNT\NT40. Click "OK."

6. The screen will show "NDC ND5100 Ethernet PCMCIA LAN Adapter". Click
   "OK."

7. Choose a suitable IRQ Level and I/O Port Address for the ND51XX.
   Click "OK."

8. Select PCMCIA in the bus type box. Click "OK."

9. Follow the on-screen instructions to complete the installation.

10. Reboot the notebook to let the settings take effect.


    Note: The REVISION(A1, A2) is marked at the ND51XX adapter card.