Sun PC-NFS
----------

The ND4300 PCI Ethernet Adapter's NDIS 2.01 driver can also be used with the 
Sun PC-NFS (version 5.x) environment.


Follow the steps listed below:

   1    Be sure PC-NFS is installed on your system and configured for an NDIS
        2.01 driver. See the PC-NFS Installation Procedure Manuals for more
        information.

   2    Run "NFSCONF". Select "Adapter" Menu. Select "Ethernet". Select "NDIS".

   3    Insert the PC-NFS QUIKNDIS diskette into the floppy drive. Change to
        the drive containing the QUIKNDIS diskette (e.g., " A:\ ").

   4    At the prompt type:

                QUIKNDIS

        Then press <Enter>.

   5    A message will appear asking for the current boot drive. Enter the
        current boot drive and then press <Enter>.

   6    Press "Y" to save the current "PROTOCOL.INI" file as "PROTOCOL.OLD".
        Ignore this step if this dialog box does not appear.

   7    In the "Adapter Card List" box, select the "Custom" option to install
        the ND4300 PCI Ethernet Adapter's NDIS driver for PC-NFS.

   8    Remove the QUIKNDIS disk from the floppy drive. Insert the ND4300 PCI 
        Ethernet Adapter's driver diskette into the floppy drive.

   9    Follow the dialog boxes and enter the correct driver and path on the
        ND4300 PCI Ethernet Adapter's driver diskette to install the NDIS 
        driver (e.g., "A:\NDIS.DOS\").

   10   Enter "ND4300" for the NIF file name and then press <Enter>.

   11   Make the appropriate changes to "CONFIG.SYS" and "AUTOEXEC.BAT".

   12   Reboot your system.

        The installation of the NDIS 2.01 driver for PC-NFS is now complete.


-------------------------------------[END]--------------------------------------