Workstation for DOS ODI Client
------------------------------

   Introduction:
   -------------
   This document describes the procedure to setup the NetWare DOS Requester
   driver for ND4300 PCI Ethernet Adapter.

   Location of Driver:     \DOS\ND4300.COM

   Sample Configuration Files:
   ---------------------------
      STARTNET.BAT:
         LSL
         ND4300
         IPXODI
         VLM 

      NET.CFG
         LINK DRIVER ND4300
              FRAME ETHERNET_802.2
                                                
              
         NETWARE DOS REQUESTER
              FIRST NETWORK DRIVE = F

  
   Setup Procedures for Novell NetWare DOS Requester ( VLM) :
   -----------------------------------------------
      The  installation utility  INSTALL.EXE  is  located on NetWare's
      "Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
      for DOS Disk.

      The NetWare Client Install program screen will appear.  You must
      complete each of the questions.  These options are specific to your
      needs.

      1. Enter the destination directory for the NetWare Client.
         (The default directory is C:\NWCLIENT.)

      2. Gives you the option to automatically update the CONFIG.SYS
         and the AUTOEXEC.BAT files or modify them at a later time manually.

      3. Do you wish to install support for MS Windows ? (Y/N)
         (MS Windows Subdirectory: default C:\WINDOWS)

      4. Asks you to select a network  driver and  provide  configuration
         options.  It uses the  specifications  you select to  create the
         file NET.CFG.  Insert the ND4300 PCI Ethernet Adapter drivers 
         diskette when prompted for the driver diskette and specify the 
         driver path
 
         A:\

      5. Press <Enter> to install


   NOTE:
   -----
      1. Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the
         network mappings to work properly.

      2. Installing Multiple LAN Adapters:
         The keyword, EtherID, is provided for multiple LAN adapters in a
         single system by  ND4300.COM. If EtherID unknown, you can ignore
         it in the  NET.CFG  file and directly run ND4300.COM under the DOS
         prompt,then your screen will  display  every adapter EtherID and
         select which one you need.


-----------------------------------[ END ]-------------------------------------