NOVELL NETWARE
==============
Installation Procedures for the Following Networks:

    Novell Netware (Version 2.1x)
    Novell Netware (Version 3.x)


******************************************************************************
*   Novell Netware (Version 2.1x)
*   Novell Netware (Version 3.x)
******************************************************************************

1.  Copy the file GCS1IPX.COM from the \NOVELL subdirectory on your Drivers 
    Disk to the appropriate subdirectory on your hard disk or network boot 
    diskette.

2.  To start the workstation, run GCS1IPX.

3.  Run NETX.

4.  Change to the network driver (Usually F:\LOGIN>).

5.  Log in to the network.


Grey Cell's preconfigured driver GCS1IPX.COM was gernated with the latest 
Novell code.  If you need to build your own IPX.COM, you must run
SHGEN or WSGEN procedures described below.

1.  Using the DOS LABEL command, label a blank formatted diskette as 
    follows:-

    Type:       LABEL
    Then enter: LAN_DRV_GCS

2.  Copy the GCS1IPX.OBJ and GCS1IPX.LAN files from the \NOVELL subdirectory
    onto your LAN_DRV_GCS diskette.

3.  Run SHGEN or WSGEN using the instruction in your NetWare Installation
    manual.  Choose the Grey Cell Pocket Network Adaptor GCS1000 option.

4.  There is no need to set any options as the Pocket Network Adaptor is
    auto-configurable.