Driver Installation Guide for Microsoft Windows 95
	 ========================================================

Introduction
============
    This document describes the procedures to install Windows 95 driver
    for AE-200PNP Ethernet Adapter.

    Windows 95 is the operation system with Plug&Play feature.	If you set
    the adapter in Plug&Play mode, Windows 95 will auto-detect your card's
    configuration and set it.  The user don't need to do anything for the
    adapter configuration or installing the driver. If you set the network
    card in Jumperless mode, you must setup driver as following procedures
    by manual.


Installation procedure
======================

    1. When log into Windows 95, click on the "Start" icon ,then move the
       mouse to "Settings" icon and click on the "Control Panel".

    2. In the Control Panel window, click on the "Network" icon.

    3. In the Network Configuration dialog box, choose the "Add.." button.

    4. When the Select Network Component Type dialog box appears, select
       "Adapter" icon and then press "Add" button.

    5. In the Selected Network adapters dialog box, Choose the "Have disk"
       button.

    6. Insert the driver diskette into drive A or B.

    7. When the Install From Disk dialog box appear, specify the driver path
       (A:\WIN95 or B:\WIN95) and then choose "OK" button.

    8. Then, you will see "AE-200PNP Ethernet Adapter" list in the dialog
       box, choose "OK" button.

    9. The Windows 95 OS begin to copy driver from diskette and some system
       files from Windows 95 installation CD or diskette.

   10. Then, you will see "AE-200PNP Ethernet Adapter" list in the Network
       Configuration dialog box.

   11. Restarting your system you will acquire network service.