NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              VREPAIR.OBJ for NetWare 286 v2.1x
DOCUMENT ID:        TID000434
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         VRP215.EXE

NOVELL PRODUCT and VERSION:
NetWare Pre 3.11 and 2.2

ABSTRACT:
This file is a patched VREPAIR.OBJ file for NetWare v2.1x.  The file
corrects problems with corruption on a volume beginning after 256 MB on a
large drive.  The file allows configuration of multiple printers when
running NETGEN.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  VRP215.EXE

Files Included     Size     Date        Time

  VRP215.TXT          (This File)
 VREPAIR.OBJ     132019    7-09-90      4:52p


This README file accompanies VREPAIR.

This version of VREPAIR.OBJ for Advanced and SFT NetWare 286 v2.1x allows
for use with large drives, where a volume begins above 256 Mb on the drive.
 It also allows for use with multiple attached printers; this represents a
fix to the workaround of reducing the number of printers in NETGEN in order
to run VREPAIR on a system with multiple printers.  This version has not
been thoroughly tested and should be considered in alpha test form.  Be
sure to make a full backup before implementing this revision.


To install this version of VREPAIR.OBJ:

1) For 5.25" media, copy VREPAIR.OBJ to your working copy of the UTILOBJ-2
diskette or subdirectory.  For 3.5" media, copy VREPAIR.OBJ to your 
working copy of the UTILOBJ diskette or subdirectory.

2) Run NETGEN and regenerate the operating system as you normally would. Be
sure to select the Link/Configure File Server Utilities in NETGEN.

3) The newly generated VREPAIR.EXE should be copied onto your working copy
of the UTILEXE-2 (5.25" media) or UTILEXE (3.5" media) diskette or
subdirectory.

ÿ