NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              Pronet-10 OS and WS Driver for v2.0a
DOCUMENT ID:        TID000300
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         PRO10.EXE

NOVELL PRODUCT and VERSION:
NetWare Pre 3.11 and 2.2

ABSTRACT:
This file contains operating system and shell drivers for Proteon's ProNet
10 to be run with Novell Advanced NetWare v2.0a.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  PRO10.EXE

Files Included     Size     Date        Time

   PRO10.TXT          (This File)
   AN216.COM      52925    8-13-87      2:58p
  AOS141.OBJ       3454    6-30-87      7:24p
  BOS141.OBJ       3454    6-30-87      7:25p
  COS141.OBJ       3454    6-30-87      7:25p
  DOS141.OBJ       3454    6-30-87      7:25p
 NETBIOS.COM      38877    7-28-87     12:43a
     READ.ME        225    6-30-87      6:57p
SHELLDRV.OBJ       6906    8-13-87      2:57p
  UPDATE.BAT       1337    7-28-87     12:52a


UPDATE

ProNET-10 driver update to driver version 2.16 shells and driver version
1.41 for the operating system.  About a 30 percent speed improvement will
result depending on hardware.

After the new drivers are copied onto your GENSH and GENOS disks you should
run the GENSH and GENOS programs to re-link	the files.

You should find a file AN216.COM also on the GENSH-2 disk.  This is the
pre-linked com file for the shell with all Novell changes as of the first
of June, 1986.  These shells will all run on any hardware setting (I/O
address 300 thru 378 and interrupt 2 thru 5.)

This utility will update the driver files on your copies of Advanced
Netware version 2.0A.  The changes should only be made to the copies of the
master disks shipped with Netware.

At any time you are asked to "Strike a key when ready" you may abort the
process by typing Ctrl Break.  No further disk writes will be done.

ÿ