NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              Patch for PAUDIT with NetWare v2.15
DOCUMENT ID:        TID000286
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         PAUDFX.EXE

NOVELL PRODUCT and VERSION:
NetWare Pre 3.11 and 2.2

ABSTRACT:
This NetWare v2.15 patch fixes the operating system OBJ files.  With this
patch the OBJ files will record correct disk storage numbers in the
NET$ACCT.DAT file.  The problem can be seen when the user runs PAUDIT and
calculates the amount of hard disk space an operator is using then compares
that amount to the amount of space recorded in SYSCON (under OTHER
INFORMATION).  The two amounts will disagree.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  PAUDFX.EXE

Files Included     Size     Date        Time

  PAUDFX.TXT          (This File)
  ZAPOBJ.EXE      28660    7-31-90      4:24p
  PAUDIT.FIX       1216    1-08-91      4:37p


This README file accompanies PAUDIT.FIX.

This fix file is intended for v2.15 and patches the OS .obj files so that
they will record correct numbers in net$acct.dat for disk storage.  The
symptoms of this problem can be seen if the user runs PAUDIT and calculates
the amount of space a user is using on the hard drive and compares it to
the amount of space recorded in SYSCON (under OTHER INFORMATION).  The two
amounts will disagree.

ZAPOBJ.EXE is needed to apply this patch.  It is a generic tool for
patching NetWare .obj files.  ZAPOBJ.EXE will create a new .obj file with
the fixes below applied.

   ZAPOBJ.EXE has the following three parameters.
      1.  The existing .obj file to be fixed.
      2.  The name of the new .obj file which will be created by
ZAPOBJ.EXE.
      3.  The name of the .fix file (paudit.fix).

Since netgen uses .obj files with a specific name the new obj file to be
created needs to eventually receive the name netgen expects to find.

To install PAUDIT.FIX:

The following steps are suggested DOS commands to patch tts.obj. These
instructions assume that you are using the hard disk installation method
and that you are currently in the directroy that you run the NetWare
generation from (for example: C:\NETWARE).

     1.   cd ttsobj
     2.   ren tts.obj @tts.obj
     3.   zapobj  @tts.obj tts.obj paudit.fix
     4.   cd ..
     5.   NETGEN
ÿ