NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  Kodak 560E Automated Disk Library
README FOR:  KOD560.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 4.01

ABSTRACT:

This driver was specifically written for Novell's High Capacity Storage System
with Kodak model 560E AutoChangers.  It is unknown how this driver will perform
with other applications.


 -----------------------------------------------------------------
 DISCLAIMER
 THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
 -----------------------------------------------------------------


ISSUE: 

Certification Bulletin:
 -----------------------------------------------------------------

 Kodak 560E Automated Disk Library             D-822

 by Kodak Imagery Software                     08 APR 1994
 Faxback Document ID #17798

 The Novell Labs Faxback can be reached at (801) 429-2776 or (800) 414-LABS. 
Tested and Approved compatible as a Changer/Jukebox with the following Novell
products:

 NetWare (v4.01)

 Driver File(s):
 KODAKASP.DSK    (14346  04-01-1994      10:20AM)
 AHA1740.DSK     (19205  02-09-1993      07:29AM)
 AHA1540.DSK     (21407  02-09-1993      04:12PM)
 ASPITRAN.DSK    (1744   02-11-1993      12:38PM)

 Support Module(s):
 KODAKASP.DDI    (1253   02-16-1994      02:17PM)

 Test Configuration:

 Product Name:           Kodak 560E Automated Disk Library
 Jukebox Device(s):      1 KODAK 560E SCSI  (20 G)  [Firmware V5.00 6/9/93]
 MO Unit(s):             1 SONY SMO-C501-00G SCSI  (300 M)
 Host Bus Adapter(s):    Adaptec 1740  EISA
 Adaptec 1542  Rev. H  ISA [BIOS BD00 ver C]
   [Firmware 5D98 ver C]
 Server Model(s):        Compaq Prosignia 486DX2 66 MHz
 System Memory > 16 MB:  Supported with workaround
 Loading Software:       DR DOS 6.00

 Configuration Notes:

 This bulletin does not in any way warrant the Applications used for testing.

 The term Tested and Approved applies only to the exact configuration
documented in this bulletin. For more information regarding the specific test
configuration, please contact:

 Kodak Imagery Software
 7 Oak Park
 Bedford, MA  01730
 -----------------------------------------------------------------

 Self-Extracting File Name:  KOD560.EXE     Revision:  A

 Files Included     Size     Date      Time

 \
    KODAK.TXT         (This File)
 KODAKASP.DDI       1253   02-16-94    2:17p
 KODAKASP.DSK      14346   04-01-94   10:20a


 Kodakasp.ddi Information:

 NetWare ASPI Kodak 560E AutoChanger Driver v4.0"

 This driver was specifically written for Novell's High Capacity Storage System
with Kodak model 560E AutoChangers.  It is unknown how this driver will perform
with other applications.


 This driver has no user defined options.  The AutoChanger should be powered up
and ready before this driver is loaded.

 Use this driver with Adaptec's ASPITRAN and the Adaptec driver to go with your
adapter card.  KODAKASP should be loaded after the Adaptec ASPITRAN and driver
are loaded.  The changer device will not be listed with devices until a scan
for new devices is done either by the end user typing scan for new devices at
the command line or by mounting a volume after KODAKASP is loaded."

Self-Extracting File Name: kod560.exe

Files Included     Size     Date      Time

..\
      KOD560.TXT     (This file)
    KODAKASP.DDI            1253         2-16-94      2:17:12 pm
    KODAKASP.DSK           14346          4-1-94     10:20:02 am


Installation Instructions:

Kodakasp.ddi Information:

 NetWare ASPI Kodak 560E AutoChanger Driver v4.0"

 This driver was specifically written for Novell's High Capacity Storage System
with Kodak model 560E AutoChangers.  It is unknown how this driver will perform
with other applications.


 This driver has no user defined options.  The AutoChanger should be powered up
and ready before this driver is loaded.

 Use this driver with Adaptec's ASPITRAN and the Adaptec driver to go with your
adapter card.  KODAKASP should be loaded after the Adaptec ASPITRAN and driver
are loaded.  The changer device will not be listed with devices until a scan
for new devices is done either by the end user typing scan for new devices at
the command line or by mounting a volume after KODAKASP is loaded."


 -----------------------------------------------------------------
 Any trademarks referenced in this document are the property of their
respective owners.  Consult your product manuals for complete trademark
information.
 -----------------------------------------------------------------