NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  IWSB: Routing Patch
README FOR:  IWSBP1.EXE

NOVELL PRODUCTS and VERSIONS:
IntranetWare for Small Business

ABSTRACT:

In IntranetWare for Small Business (IWSB), a customer will be unable to BIND
IPX to multiple LAN cards.  It will prevent binding IPX to both a physical LAN
card and NetWare Connect's PPPRNS service.

 NOTE: With the first release of  LSLCRIPP.NLM a problem specific to TCPIP, had
been identified. When IP is bound, no error messages are returned, but IP does
not function.  It did not effect IPX, multiple IPX protocols could be bound.


 -----------------------------------------------------------------
 DISCLAIMER
 THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
 -----------------------------------------------------------------


SYMPTOM:

A customer will be unable to BIND IPX to multiple LAN cards.  Example: a server
has two NE2000s LAN cards.  You are able to load NE2000 for both LAN cards and
can BIND IPX to first LAN card.  In attempting to BIND IPX to the second LAN
card an error is returned:

 SERVER-4.11-1850:  Attempt to bind IPX LAN protocol to Novell NE2000 failed. 
(error=FFFFFF89)

 This problem also effects NetWare Connect running on IWSB.  It will prevent
binding IPX to both a physical LAN card and NetWare Connect's PPPRNS service. 
No error is returned during NetWare Connect startup, but CONFIG at the server
console will show that for PPP Remote Node Services "No LAN protocols are bound
to this LAN board."  This causes any remote user dialing in to be unable to
login to NetWare or use   TCPIP.

SOLUTION: 

NOTE:  This patch is only needed for IntranetWare for Small Business (IWSB)
with serial numbers in the following ranges:
 20624444 - 20624657,  61717237 - 62244253,  79005005 - 79010004.
 If your serial number is not in the above ranges, you will not need this
 patch.  To check your Server's serial number, type VERSION at the server
console.

 To resolve this issue LSLCRIPP.NLM needs to be loaded from the STARTUP.NCF.

 NOTE: LSLCRIPP.NLM must be loaded each time the server is started. Also, make
sure that PK411.NLM is loaded first before loading LSLCRIPP.NLM.

Self-Extracting File Name: IWSBP1.EXE

Files Included     Size     Date      Time

..\
      IWSBP1.TXT     (This file)
    LSLCRIPP.NLM            1025          4-3-97      9:06:14 pm
       PK411.NLM           78909         2-14-97      5:09:38 pm


Installation Instructions:

Copy LSLCRIPP.NLM and PK411.NLM to C:\NWSERVER
 Add the following lines to STARTUP.NCF:

 LOAD PK411.NLM
 PMLOAD LSLCRIPP.NLM

 NOTE: LSLCRIPP.NLM must be loaded each time the server is started..   Also,
make sure that PK411.NLM is loaded first before loading LSLCRIPP.NLM. 


 -----------------------------------------------------------------
 Any trademarks referenced in this document are the property of their
respective owners.  Consult your product manuals for complete trademark
information.
 -----------------------------------------------------------------