1 Up-to-date 2 Being Configured 3 Being Removed 4 Name 5 IP Address 6 Address 7 Subnet Mask 8 Status 9 Unknown 10 This utility has digested the data in the selected file. The digest value is 11 Verify this digest value with the administrator at the site of this \nslaver server. Click 'Yes' if the digests are identical, otherwise, click 'No'. 12 This server is a slave member of a Virtual Private Network (VPN). The master VPN server ensures that all members maintain the the same view of the VPN topology and use the most up_to_date encryption information.\n\nTo view or update the netwotk topology at this slave server, double-click the master server in the NDS tree, select the VPN properties page,and then click Status. 13 This server is not a member of Virtual Private Network(VPN). 14 BDR_SEC.HLP 15 You must select at least one protocol under "Passed Protocols".\nIf you do not select a protocol, you will disable the encrypted tunnel.\nAre you sure you want to continue? 16 Being Removed 17 You did not enter a valid IP address. 18 You did not enter a valid subnet mask. 19 You have not entered a valid IP address.\nAre you sure you want to continue? 20 The Response Timeout must be between 5 to 300 seconds. 21 An error occured while the slave server was being removed. 22 Only the VPN Member with "Being Removed" \nStatus can be removed. 23 Select only one entry. 24 Select an entry first. 25 An error occured while the file was being read. 26 The slave server configuration could not be read from the file. 27 The message digest could not be extracted from the information on the floppy disk. 28 This server is already a member of the VPN.\nAre you sure you want to replace this server? 29 delete_element failed 30 Server %s has been added to the VPN.\nDo you want to specify static routes for this server's local IP networks and hosts?\nTo specify static routes later, double-click the server entry. 32 Adding the server to the VPN ... 33 The NDS schema could not be extended. 34 The VPN type attribute could not be read from NDS. 35 Unable to get the required Heap space. 36 Failed to Connect to VPN Master.\nClose Some connections and try again. 37 The new slave member could not be added to the VPN list 38 Failed to communicate with VPMASTER.NLM on the server.\nLoad VPMASTER.NLM on the server and try again. 39 Error in reading VPN master's database. 40 N/A 42 This server is configured to be VPMaster.\nLoad VPMASTER.NLM and try again. 43 Authentication Failure 44 Server %s will not be added to the VPN. 45 \n\nYou need to regenerate the encryption information at the \n console of the named server, and then try adding again. 46 Could not get the NDS connection. 47 Are you sure about the ip address you have entered? 48 Virtual Private Network 49 VPN Member: %s 50 The key change interval must be between 100 to 65535 packets. 51 The Connect Timeout interval must be between 5 to 1200 seconds. 52 The Update Timeout interval must be between 1 to 300 minutes. 53 Border Manager is either not installed or is unavailable on this server. 54 This slave server is incompatible with the master server. 55 The IP address and subnet mask of the encrypted tunnel are incorrect.\nThe selected server will not be added to the VPN. 56 The public IP address of a slave server cannot be used as a static host route. 57 This IP address and subnet mask cannot be used as a static route. 58 This IP address is already configured as a static route for this VPN server. Enter a different address. 59 The network number and its subnet mask are mismatched.\nThe IP address of the network will be truncated to %s. 60 Add a local network or host 61 Remove a local network or host 62 \ 63 Free 64 Unknown 65 Unbinding 68 You do not have sufficient access rights to complete this operation. 69 Network\Novell\System Config\Language\NWLANGUAGE 70 Software\Novell\Parameters\NWLanguage 71 This is a Master server of Virtual Private Network.\nThis can not be deleted from VPN 32781 Add a slave server to the VPN 32782 Remove the slave server from the VPN 61440 Open 61441 Save As 61442 All Files (*.*) 61443 Untitled 61446 an unnamed file 61457 &Hide 61472 No error message is available. 61473 An unsupported operation was attempted. 61474 A required resource was unavailable. 61475 Out of memory. 61476 An unknown error has occurred. 61696 Invalid filename. 61697 Failed to open document. 61698 Failed to save document. 61699 Save changes to %1? 61700 Failed to create empty document. 61701 The file is too large to open. 61702 Could not start print job. 61703 Failed to launch help. 61704 Internal application error. 61705 Command failed. 61706 Insufficient memory to perform operation. 61707 System registry entries have been removed and the INI file (if any) was deleted. 61708 Not all of the system registry entries (or INI file) were removed. 61712 Please enter an integer. 61713 Please enter a number. 61714 Please enter an integer between %1 and %2. 61715 Please enter a number between %1 and %2. 61716 Please enter no more than %1 characters. 61717 Please select a button. 61718 Please enter an integer between 0 and 255. 61719 Please enter a positive integer. 61720 Please enter a date and/or time. 61721 Please enter a currency. 61728 Unexpected file format. 61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given. 61730 Destination disk drive is full. 61731 Unable to read from %1, it is opened by someone else. 61732 Unable to write to %1, it is read-only or opened by someone else. 61733 An unexpected error occurred while reading %1. 61734 An unexpected error occurred while writing %1. 61836 Unable to read write-only property. 61837 Unable to write read-only property. 61840 Unable to load mail system support. 61841 Mail system DLL is invalid. 61842 Send Mail failed to send message. 61856 No error occurred. 61857 An unknown error occurred while accessing %1. 61858 %1 was not found. 61859 %1 contains an invalid path. 61860 %1 could not be opened because there are too many open files. 61861 Access to %1 was denied. 61862 An invalid file handle was associated with %1. 61863 %1 could not be removed because it is the current directory. 61864 %1 could not be created because the directory is full. 61865 Seek failed on %1 61866 A hardware I/O error was reported while accessing %1. 61867 A sharing violation occurred while accessing %1. 61868 A locking violation occurred while accessing %1. 61869 Disk full while accessing %1. 61870 An attempt was made to access %1 past its end. 61872 No error occurred. 61873 An unknown error occurred while accessing %1. 61874 An attempt was made to write to the reading %1. 61875 An attempt was made to access %1 past its end. 61876 An attempt was made to read from the writing %1. 61877 %1 has a bad format. 61878 %1 contained an unexpected object. 61879 %1 contains an incorrect schema. 61888 pixels