NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              PS/2 SCSI Driver for NetWare 386 v3.10a
DOCUMENT ID:        TID000314
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         PS2386.EXE

NOVELL PRODUCT and VERSION:
NetWare Pre 3.11 and 2.2

ABSTRACT:
This file fixes a problem with the PS2SCSI.DSK driver shipped with NetWare
v3.10a.  The driver was reporting a nonmedia error when the SCSI device
returned a completion of 07 -- Adapter Hardware Failure and 0ch -- Command
Completed with failure.  This error would result in deactivation of the
SCSI device.  This version of the driver will retry when encountering the
0ch error rather than deactivating the device.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  PS2386.EXE

Files Included     Size     Date        Time

\
 PS2SCSI.DSK       9577   02-12-91      9:03p
  PS2386.TXT          (This File.)
\PS2OLD\
 PS2SCSI.DSK       9547   11-14-90      5:57p
  README.OLD       1649   03-19-91     09:35a


The previous driver was reporting a Non-Media-Error when the SCSI device
returned a completion of 07 - Adapter Hardware Failure and 0ch - Command
Completed with failure.  This would result in deactivation of the SCSI
device.  This version of the driver will retry when encountering the 0ch
error rather than deactivating the device.

WARNING!!! Using this PS2SCSI.DSK in conjunction with VREPAIR.NLM (86330
dated 1-09-91 VRP310.ZIP) may cause a loss of data!

To install this version of PS2SCSI.DSK:

1)    Copy PS2SCSI.DSK to your NetWare system start-up area (SYS:SYSTEM
and/or DOS partition).  Be sure to delete the old version of the PS2SCSI
driver.

2)    Load the driver as you normally would on your system.
ÿ