NetWare 4.0          

  NETWARE 4.0 SERVER INSTALLATION NOTES:
  FOR THE INTEL EtherExpress(tm) 16 FAMILY OF NETWORK ADAPTERS
  ============================================================

  This document applies to the EtherExpress(tm) 16, 16TP, 16C, FLASHC,
  MCA, and MCA/TP.  It contains notes for installing the driver, but
  does not explain how to configure an EtherExpress board.

  Before you begin, you need the I/O address and IRQ of the
  EtherExpress adapter.  You can get this information by running
  SOFTSET (for ISA cards) or the IBM System Configuration utility 
  (for Microchannel cards).

  PROCEDURE:
  ----------
  1.  Install Netware 4.0 according to the NetWare 4.0 installation
      manual.

      NOTE: The NetWare 4.0 server driver for the EtherExpress card ships 
            with NetWare 4.0.

  2.  From the INSTALL.NLM main menu, select the option that is
      appropriate to your situation.

  3.  From the INSTALLATION OPTIONS menu, select "LAN Driver Options
      (Configure/Load/Unload LAN Drivers)".  Follow the on-screen
      instructions if you need to load the driver from diskette.

  4.  Select the "Intel EtherExpress ISA Family" or "Intel EtherExpress
      MCA Family" from the list of adapters.

  5.  Configure the LAN driver by entering the Port Value (I/O Address)
      that you noted when you ran SOFTSET or the IBM SC utility.  Also
      select the appropriate frame type(s).  Press F10 to exit the form
      and load the driver.

  6.  Continue with your NetWare 4.0 installation as needed.