NDIS...................General installation notes

NDIS INSTALLATION NOTES:
FOR THE INTEL EtherExpress(tm) 16 FAMILY OF NETWORK ADAPTERS
============================================================

  This document applies to the EtherExpress(tm) 16, 16/TP, MCA, and
  MCA/TP.  It contains installation notes for installing the driver.
  It does not explain how to configure an EtherExpress board.  For
  instructions about configuring the board, see either the Expert's
  Guide or the Complete Guide for your board.

  NOTE: This document or an updated version (if the procedure has 
        changed since this file was written) is also available on 
        FaxBACK (document # 6309).

INTRODUCTION:
-------------

  Many different network operating systems use a standard NDIS driver
  to talk to the network adapter.  The NDIS subdirectory on the
  EtherExpress disk contains the files you need to use the EtherExpress
  card with one of these operating systems.

  FILE           Purpose
  ----           --------------------------------------------
  EXP16.DOS      NDIS driver for DOS workstations.


  EXP16.OS2      NDIS driver for servers & OS/2 workstations.

  PROTOCOL.INI   Fragment of the general PROTOCOL.INI file.
                 This fragment contains information specific
                 to the EtherExpress 16 boards.  You'll need
                 to add this fragment to the general
                 PROTOCOL.INI file.

  EXPSTAT.EXE    A utility for analyzing problems after your
                 driver is loaded.  You can run this under
                 OS/2 (inside or outside the compatibility
                 box) or under DOS.


  Your NOS may also make use of a Network information (.NIF) file.  If
  so, you can find the .NIF file for DOS workstations in the
  \MSLANMAN.DOS\DRIVERS\NIF directory, and the .NIF file for OS/2
  workstations in the \MSLANMAN.OS2\DRIVERS\NIF directory.