LAN Server 3.x

  This document applies to the EtherExpress(tm) 16, 16TP, 16C, FLASH,
  FLASH TP, FLASHC, MCA, and MCA/TP adapters.  The FlashC will work with 
  the flash/boot rom disabled.  This document contains notes for 
  installing the NDIS driver and does not explain how to configure an 
  EtherExpress board.  For instructions about configuring the board, see
  the installation guide.

  INTRODUCTION
  ------------
  Before you begin, you will need the I/O address of the EtherExpress 16 
  board. You can get this information by running SOFTSET on the EtherExpress 
  16, 16TP, 16C, FLASH, FLASH TP, or FlashC card or the IBM SC program on the 
  Etherexpress MCA or MCA/TP card.
  
  This installation does not use OS/2 Extended Services. 
  
  These steps apply to both the file server and the workstation.  After 
  installing OS/2, follow the below steps prior to installing LAN Server 3.0
  or the workstation requestor.
  
  OS/2 2.1 and LAN Server 3.0
  ---------------------------
  
  1.  Copy EXP16.OS2 and EXP16.NIF from the Intel EtherExpress 16 LAN
      Adapter Driver and Option Diskette or from the downloaded file to the
      C:\IBMCOM\MACS directory.
  
  2.  Install LAN Adapter and Protocol Support (LAPS) from an OS/2 window.
  
  3.  After installing the software, select configure LAN transports.  The 
      EtherExpress 16 will appear in the LAN Adapters window.  Select the
      necessary protocols and save the configuration.
  
  4.  Exit LAPS, shutdown the system and reboot the computer.  The complete
      PROTOCOL.INI file will be created and put in the C:\IBMCOM directory.  
      The CONFIG.SYS and AUTOEXEC.BAT files will be updated. 
  
  
  SAMPLE PROTOCOL.INI FILE
  ------------------------
  [PROT_MAN]
     DriverName=PROTMAN$
  
  [IBMLXCFG]
     EXP16_nif = EXP16.nif
     NETBEUI_nif = NETBEUI.nif
  
  ;*--------------------------------------------------------------------*
  ;*---------------------PROTOCOL SECTION--------------*
  ;*--------------------------------------------------------------------*
  
  [NETBEUI_nif]
     DriverName = netbeui$
     Bindings = EXP16_nif
     ETHERAND_TYPE = "I"
     USEADDRREV = "YES"
     OS2TRACEMASK = 0x0
     SESSIONS = 40
     NCBS = 95
     NAMES = 21
     SELECTORS = 5
     USEMAXDATAGRAM = "NO"
     ADAPTRATE = 1000
     WINDOWERRORS = 0
     TI = 30000
     T1 = 500
     T2 = 200
     MAXIN = 1
     MAXOUT = 2
     NETBIOSTIMEOUT = 500
     NETBIOSRETRIES = 8
     NAMECACHE = 0
     PIGGYBACKACKS = 1
     DATAGRAMPACKETS = 2
     PACKETS = 350
     LOOPPACKET= 1
     PIPELINE = 5
     MAXTRANSMITS = 6
     MINTRANSMITS = 2
     DLCRETRIES = 5
  
  ;*---------------------------------------------------------------------*
  ;*---------------------------MAC SECTION--------------------*
  ;*---------------------------------------------------------------------*
  
  [EXP16_nif]
     DriverName = EXP16$
     IOADDRESS = 300


* Third-party trademarks are the property of their respective owners.