LAN Manager* Workstation/Server v1.00
       LAN Manager 2.2 Workstation/Server installation notes for Intel's
       EtherExpress(TM) PRO/10 PCI LAN adapters
      =================================================================
      
      Location of Driver: on Intel BBS (503-264-7999)
      
      From the BBS, select:
          
          4 - File Downloads
          1 - Network Products
          5 - Adapters and Hubs
          1 - EtherExpress Adapters
          1 - Current Release
          Select E10PMS.EXE
      
      E10PMS.EXE expands onto diskette with the following structure:
          
          (DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\E10P\E10P.DOS
          (OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\E10P\E10P.OS2
      
      
      Sample Configuration Files
      --------------------------
      
      CONFIG.SYS (for DOS will contain):
          DEVICE=C:\LANMAN\PROTMAN.DOS /I:C:\LANMAN
          DEVICE=C:\LANMAN\E10P.DOS
      
      CONFIG.SYS (for OS/2 will contain):
          DEVICE=C:\LANMAN\PROTMAN.OS2 /I:C:\LANMAN
          DEVICE=C:\LANMAN\E10P.OS2
      
      PROTOCOL.INI (will contain):
          
          [E10P_NIF]
          ; PROTOCOL.INI section for the Intel EtherExpress(TM) PRO/10 PCI
          ; Adapter
          
          DRIVERNAME = E10P$
      
      
      General Installation
      --------------------
      
      1  Run the appropriate Microsoft LAN Manager setup for the computer
         you are setting up (DOS, OS/2 or OS/2 Server).  When prompted
         for the LAN adapter driver, select "Other Driver" (the
         EtherExpress PRO/10 PCI driver isn't included on the LAN Manager
         disk) and insert the PRO/10 PCI Configuration and Drivers disk.
         Select the EtherExpress PRO/10 PCI driver and follow the
         directions.
      
      2  When completed, reboot your computer in order for changes to
         take effect.
      
      
      Hints and Tips
      --------------
      
      1  Parameters for the PROTOCOL.INI file:
      
         DRIVERNAME: This is the one required parameter.  See example at
         the top of this document for syntax.
      
      2  Sample PROTOCOL.INI for LAN Manager:
          
          [PROTMAN]
          DRIVERNAME = PROTMAN$
          DYNAMIC = YES
          PRIORITY = NETBEUI
          
          [NETBEUI_XIF]
          Drivername = netbeui$
          SESSIONS = 6
          NCBS = 12
          BINDINGS = "E10P_NIF"
          LANABASE = 0
          
          [E10P_NIF]
          ; PROTOCOL.INI section for the Intel EtherExpress PRO/10 PCI
          ; LAN Adapter
          
          DRIVERNAME = E10P$
      
      
      
      *  Third-party trademarks are the property of their respective
         owners