;   [ethernetiie]

;   A LIST OF THE ENTRIES AND POSSIBLE VALUES:

;   drivername =		min = 1 char + $, max = 8 char + $,
;				default = ETHIIE$
;			 NOTE:	A value for 'drivername =' is required!

;   interrupt = 		min = 2, max = 15, default = 2
;			 NOTE:	This entry alone sets the IRQ level,
;				no HW jumpering exists!

;   ioaddress = 		min = 0x290, max = 0x320, default = 0x300
;			 NOTE:	Value of this entry must correspond to setting
;				on adapter card! If omitted, board is searched
;				for in all alternative adresses.

;   maxtransmits =		min = 1, max = 50, default = 6
;   netaddress =		exactly 12 hex digits in double quotes,
;				default = as set in HW
;   transceiver =		value = "bnc", "dix", "auto"
;				default = "auto" (for thin-wire Ethernet)

;   THE ENTRIES USED BY LAN MANAGER: