December 1991

	       D-Link Ethernet Pocket LAN Adapter
		  PC-NFS Driver Installation
	       ==================================


The D-Link PC-NFS Driver Program lets you run Sun MicroSystems PC-NFS
on your PC with the D-Link Ethernet Pocket LAN Adapter.

The following files will be used in this installation:

Files	       Size (Bytes)  Date      Time   Contents
-----------    ------------  --------  -----  -------------------------
PDNFS.SYS      4160	     12-06-91         PC-NFS Driver Program
DE600PD.SYS    7721	     12-06-91         DE-600 Driver Program
DE600PD.COM    7858	     12-03-91         DE-600 Driver Program

Two methods can be used to install:

METHOD 1:

1. Install the PC-NFS program according to the procedure
described in the PC-NFS manual.  On the screen of the PC-NFS
install program, select 3C501 (the 3Com EtherLink card) as your
network interface card.  When the screens prompt you, select 3 for the
interrupt level (IRQ), and select 300h for the base I/O address.

2. Copy the following files to the \NFS directory of your hard
disk:

     PDNFS.SYS
     DE600PD.SYS
     DE600PD.COM

4. Modify the CONFIG.SYS file as follows:

	DEVICE=C:\ANSI.SYS
	DEVICE=C:\NFS\PCNFS.SYS
	DEVICE=C:\NFS\SOCKDRV.SYS
	DEVICE=C:\NFS\DE600PD.SYS 98
	DEVICE=C:\NFS\PDNFS.SYS
	LASTDRIVE=V

     AUTOEXEC.BAT file:

	SET PATH = C:\; C:\NFS
	SET TZ=EST5EDT
	NET YPDOMAIN ypserver
	NET START RDR
	NET YPSET homer
	NET NAME john
	NET USER F: \\user\john

       We use the name "john" here as an example.

       98 is the interrupt vector. The interrupt vector
       can be from 96 to 128.

5. Reboot the PC to start PC-NFS.

You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.


METHOD 2:

1. Install the PC-NFS program according to the procedure
described in the PC-NFS manual.  On the screen of the PC-NFS
install program, select 3C501 (the 3Com EtherLink card) as your
network interface card.  When the screens prompt you, select 3 for the
interrupt level (IRQ), and select 300h for the base I/O address.

2. Copy the following files to the \NFS directory of your hard
disk:

     PDNFS.SYS
     DE600PD.SYS
     DE600PD.COM

4. Modify the CONFIG.SYS file as follows:

	DEVICE=C:\ANSI.SYS
	DEVICE=C:\NFS\SOCKDRV.SYS
	DEVICE=C:\NFS\PCNFS.SYS
	DEVICE=C:\NFS\PDNFS.SYS
	LASTDRIVE=V

     AUTOEXEC.BAT file:

	SET PATH = C:\; C:\NFS
	SET TZ=EST5EDT
	NET YPDOMAIN ypserver
	NET START RDR
	NET YPSET homer
	NET NAME john
	NET USER F: \\user\john
	DE600PD 98

       We use the name "john" here as an example.

       98 is the interrupt vector. The interrupt vector
       can be from 96 to 128.

5. Reboot the PC to start PC-NFS.

You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.