December 1991

		 LANsmart Driver Installation
		 ============================

This installation procedure applies to the following D-Link products:

	DE-100
	DE-100TP
	DE-100+
	DE-100TP+

The following files will be used in this installation:

Files	       Size (Bytes)   Date	  Contents
-----------    ------------   -------	  -------------------------
DE-100.DRV     10016	     12-05-91	  Driver program for the
DE-100.EXE     10016	     12-05-91	  above-mentioned adapters


RUN LANsmart v.1.26 and v.1.30
==============================

Follow the procedure below to use the new LANsmart driver program on this
diskette with LANsmart v.1.26 and v.1.30.

1. Replace the LANsmart program LANMA03.DRV with the new driver program.
Example:

      > COPY A:\LANSMART\DE-100.DRV  C:\LANSMART\LANSMA03.DRV

2. Now, you can use both the menu mode and the command mode to log onto
the network.  The LOGON command syntax is as follows:

      > LOGON <username> <SRV|WKS> /NET:3 [other parameters]


2. RUN LANsmart Version 2.xx & 3.xx
=====================================

You may use both the menu and the command mode to logon to the network.
The LOGON command syntax is as follows:

      > LOGON <username> <SRV|WKS> /NET:DE-100 [other parameters]

The driver program DE-100.DRV should first be copied to the
directory that contains LOGON.EXE program. /NET:DE-100 specifies
to LANsmart your network adapter card.