DEC 1994 PC-NFS Driver Installation for D-Link DE-650 PCMCIA Ethernet Adapter ===================================== *********************************** NOTE *********************************** Each DE-650 series adapter comes with a driver diskette of its own. If you have more then one model of DE-650 adapter, make sure that you use the driver diskette that was included with the DE-650 adapter you are using. **************************************************************************** The D-Link PC-NFS Driver Program lets you run Sun MicroSystems PC-NFS on your PC with the D-Link DE-650 PCMCIA Ethernet Adapter. The following files will be used in this installation: Files Contents ------------ -------------------------------------------------------- PDNFS.SYS PC-NFS Driver Program. DE65NPD.SYS Packet driver program for DE-650 PCMCIA card. DE65NPD.COM Packet driver program for DE-650 PCMCIA card. Two methods can be used to install: METHOD 1: 1. Install the PC-NFS program according to the procedure described in the PC-NFS manual. On the screen of the PC-NFS install program, select 3C501 (the 3Com EtherLink card) as your network interface card. When the screens prompt you, select 5 for the interrupt level (IRQ), and select 300h for the base I/O address. 2. Copy the following files to the \IBMPC\NFS directory of your harddisk: PDNFS.SYS DE65NPD.SYS DE65NPD.COM A:\IBMPC\INSTALL\*.* 3. Modify the CONFIG.SYS file as follows: DEVICE=C:\ANSI.SYS DEVICE=C:\NFS\PCNFS.SYS /m DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\PCMCIA initial program <--- Please see note below. DEVICE=C:\NFS\DE65NPD.SYS <-d> <-w> DEVICE=C:\NFS\PDNFS.SYS LASTDRIVE=V Note: Before running packet driver, run PCMCIA initial program on A:\IBMPC\INSTALL directory. Please see as following: *** PC installed Socket service, Card service, and Client driver *** Skip this step OR *** PC installed Socket service or Databook Cardtalk *** *** PC's PCMCIA controller is Intel 82365SL *** *** PC is Toshiba T3300SL *** DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2] For detail, please refer to \IBMPC\INSTALL\README.DOC [ Parameters for INSTALL utility ] DCD16.EXE DCD16.EXE is an integration version of open adapter utility. DCD16.EXE supports Intel 82365SL, Toshiba T3300SL's ICCNT, and Socket Services v1.01, v2.0, v2.01, v2.10 Card Services v2.0, v2.01, v2.10. For more detail information, please refer to \IBMPC\INSTALL\README.DOC. device=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2] Parameter description: /iop :I/O base /irq :IRQ value /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x5. P3 :The selectable slot number. The default value is 0. You must set 0 when you use slot 1. Set slt:1 when slot 2 is used,etc. AUTOEXEC.BAT file: SET PATH = C:\; C:\NFS SET TZ=EST5EDT SET NFSDRIVE = C NET YPDOMAIN ypserver NET START RDR NET YPSET homer NET NAME john NET USER F: \\user\john We use the name "john" here as an example. 4. Reboot the PC to start PC-NFS. You may now execute the PC-NFS commands to communicate other computers through the TCP/IP protocol. METHOD 2: 1. Install the PC-NFS program according to the procedure described in the PC-NFS manual. On the screen of the PC-NFS install program, select 3C501 (the 3Com EtherLink card) as your network interface card. When the screens prompt you, select 5 for the interrupt level (IRQ), and select 300h for the base I/O address. 2. Copy the following files to the \NFS directory of your harddisk: PDNFS.SYS DE65NPD.SYS DE65NPD.COM A:\IBMPC\INSTALL\*.* 3. Modify the CONFIG.SYS file as follows: DEVICE=C:\ANSI.SYS DEVICE=C:\NFS\PCNFS.SYS /m DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\PDNFS.SYS LASTDRIVE=V AUTOEXEC.BAT file: SET PATH = C:\; C:\NFS SET TZ=EST5EDT SET NFSDRIVE = C PCMCIA initial program <------------------ (please see note below) DE65NPD <-d> <-w> NET YPDOMAIN ypserver NET START RDR NET YPSET homer NET NAME john NET USER F: \\user\john We use the name "john" here as an example. Note: Before run DE65NPD, run PCMCIA initial program on A:\IBMPC\INSTALL directory. Please see as following: *** PC installed Socket service ,Card service, and Client driver *** Skip this step OR *** PC installed Socket service or Databook Cardtalk *** *** PC's PCMCIA controller is Intel 82365SL *** *** PC is Toshiba T3300SL *** device=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2] Please refer to \IBMPC\INSTALL\README.doc for detail information. [ Parameters for INSTALL utility ] DCD16.EXE DCD16.EXE is an integration version of open adapter utility. DCD16.EXE supports Intel 82365SL, Toshiba T3300SL's ICCNT, and Socket Services v1.01, v2.0, v2.01, v2.10 Card Services v2.0, v2.01, v2.10. For more detail information, please refer to \IBMPC\INSTALL\README.DOC. device=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2] Parameter description: /iop :I/O base /irq :IRQ value /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x5. P2 :The selectable slot number. The default value is 0. You must set 0 when you use slot 1. Set slt:1 when slot 2 is used,etc. 4. Reboot the PC to start PC-NFS. You may now execute the PC-NFS commands to communicate other computers through the TCP/IP protocol. Notes: [-d] Delay Initial - The driver program will not initialize the network interface card until the packet driver program is accessed by its upper layer program first time. [-w] The -w parameter is for use with the Windows environment only. Is the software interrupt vector number used by the packet driver program, which can be from 96 to 128. Is the hardware interrupt (IRQ) line set on your network interface card. The default is 5 if this parameter is not specified. Is base I/O address set on your network interface card. The default address of 0x300 is used, if this parameter is not specified.