DEC 1994 NetWare Driver Installation =========================== The NetWare driver programs on this diskette are for use with the D-Link DE-650 PCMCIA Ethernet Card. This diskette is labeled as LAN_DRV_DLK and the files are organized as follows: Directory Contents ----------------------- --------------------------------------------------- \IBMPC\NETWARE A pre-generated IPXDE65N.COM. \IBMPC\NETWARE\V215B NetWare v2.15b workstation drivers. \IBMPC\NETWARE\V215C NetWare v2.15c, v2.2 or NetWare 386 workstation drivers \IBMPC\NETWARE\ODI.DOS ODI workstation driver for DOS. \IBMPC\NETWARE\ODI.OS2 ODI workstation driver for OS/2. \IBMPC\NETWARE\NET386 Server driver for Netware v3.1x. \IBMPC\NETWARE\NW40 NetWare 4.0 server and ODI client drivers. ( support NetWare v 4.0x and v3.12 ) \IBMPC\NETWARE\TURBO.DRV Turbo driver for NetWare 3.11 server and ODI client. ********************************* * QUICK SETUP FOR WORKSTATION * ********************************* A pre-generated workstation driver IPXDE65N.COM is included on this diskette. You can simply run the IPXDE65N on a workstation to access the Novell network: >IPXDE65N -- Supports NetWare Lite, 2.1x, 2.2 or NetWare 386. >NETx -- This program is provided by Novell. *********************** * WORKSTATION SETUP * *********************** If you want to generate your own workstation driver instead of using the provided IPXDE65N.COM, please do the following: 1) If you make a backup of this diskette, make sure that it is labeled as LAN_DRV_DLK. You can use the DOS LABEL command as follows: >LABEL A:LAN_DRV_DLK 2) Copy the appropriate NetWare driver files to the root directory of this diskette (or backup): >Copy A:\IBMPC\NETWARE\V215C\*.* B:\ -- For NetWare 386 workstation. 3) Execute Novell's SHGEN or WSGEN program, which resides on the SHGEN-1 or WSGEN diskette. When you are asked to select a network driver, press the INS key. You will be asked to insert a LAN_DRV_??? diskette. Insert this diskette (or backup) in drive A. Upon completion, a new IPX.COM file will be created in your SHGEN-1 or WSGEN diskette. The default values for all parameters of IPXDE65N.COM are as follows: I/O port #1 300 IRQ #1 5 Note : If you generate IPX.COM by "1:Driver Configurable by JUMPERS Utility", the I/O PORT # will be None, you must execute the JUMPERS Utility offered by NetWare, the procedure is as follows: a. >JUMPERS b. Enter the file IPXDE65N.COM to modify. c. The screen displays the following: DE-650 Options I/O PORT #1 None d. Press Enter (window assistance) d1. I/O PORT# ========= 200 220 240 260 280 300 . . . 380 d2. Select one port#. d3. Save the port# that you selected. d4. IRQ #1 None IRQ # ====== 2 3 4 . . 15 d5. Select one IRQ#. d6. Save the port# that you selected. ************************ * NETWARE LITE USERS * ************************ 1) Follow the normal installation procedure as instructed by NetWare Lite. When asked to select a network driver, simply choose "NOVELL NE2000". 2) After the installation is completed, modify the STARTNET.BAT file as follows: From: --------------------------- LSL NE2000 IPXODI A CLIENT To: --------------- DCD16 LSL DE65NODI IPXODI CLIENT DCD16.EXE DCD16.EXE is an integration version of open adapter utility. DCD16.EXE supports Intel 82365SL, Toshiba T3300SL's ICCNT, and Socket Services v1.01, v2.0, v2.01, v2.10 Card Services v2.0, v2.01, v2.10. For more detail information, please refer to \IBMPC\INSTALL\README.DOC. 3) Copy \IBMPC\NETWARE\ODI.DOS\NET.CFG file to NWLITE sub-directory which was created when you installed NetWare Lite. 4) You may now run STARTNET to access the NetWare network. ********************** * ODI DRIVER SETUP * ********************** ODI Workstation for DOS ======================= D-Link ODI Driver program allows you to run multiple protocol stacks. It also allows you to install up to two network adapters in a workstation. D-Link ODI driver supports "port, node address, protocol and frame" options. You can use these options to create your own NET.CFG file. For detailed info on Keywords, please refer to Novell's manual "NetWare ODI shell for DOS - NET.CFG options". 1) Copy the DE65NODI.COM file (from this diskette) to the directory which contains Novell's LSL.COM, IPXODI.COM and NETx.COM files. 2) Follow Novell's instructions on using the ODI programs. You can substitute the DE65NODI.COM whenever a reference is made to the Hardware Specific Module. 3) A typical startup for ODI workstation is as follows: >DCD16 -- Enable PCMCIA Adapter. >LSL -- Link Support Layer Module provided by Novell. >DE65NODI -- Hardware Specific Module provided by D-Link. >IPXODI -- IPX Protocol Stack Module provided by Novell. >NETX -- DOS Support Module provided by Novell. >LOGIN DCD16.EXE DCD16.EXE is an integration version of open adapter utility. DCD16.EXE supports Intel 82365SL, Toshiba T3300SL's ICCNT, and Socket Services v1.01, v2.0, v2.01, v2.10 Card Services v2.0, v2.01, v2.10. For more detail information, please refer to \IBMPC\INSTALL\README.DOC. >DCD16 [/iop:P0] [/irq:P1] [/slt:P2] Parameter description: /iop :I/O base /irq :IRQ value /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x5. P2 :The selectable slot number. The default value is 0. You must set 0 when you use slot 1. Set slt:1 when slot 2 is used,etc. ***************************** * SERVER AND BRIDGE SETUP * ***************************** Example : NetWare 386 Server/Bridge Setup =========================================== 1) Copy the appropriate NetWare driver files (from this diskette) to the root directory of your Novell diskette labeled SYSTEM-1. >Copy A:\IBMPC\NETWARE\NET386\*.* B:\ -- SYSTEM-1 disk must be in drive B. 2) Execute Novell's SERVER program, which resides in the SYSTEM-1 diskette. After loading the hard disk driver, you can load the network driver as follows: :Load 386DE65N.LAN -- Select your network card settings. :Bind ipx to 386DE65N :Load install -- Follow the NetWare installation two idential LAN cards (bridge) instructions. ********************************************* * NetWare 4.x SERVER and ODI CLIENT DRIVERS * ********************************************* NetWare 4.x Server Setup ========================= 1. Install the NetWare 4.x CDROM properly. Make sure that the PCMCIA Card/Socket Services and Client Driver have been properly installed in your notebook before installing the NetWare driver. If you have any questions about the PCMCIA software environment for your particular notebook, please refer to the \IBMPC\INSTALL\README.DOC file on this diskette. 2. Prepare a D-Link LAN driver diskette that includes the following files. Insert D-Link driver diskette in A: driver. Insert D-Link LAN driver diskette in B: driver. 1) Copy NWDE65N.LAN, NWDE65N.LDI from D-Link driver programs diskette as follows: copy A:\IBMPC\NETWARE\NW40\SRV\NWDE65N.LAN B: copy A:\IBMPC\NETWARE\NW40\SRV\NWDE65N.LDI B: 2) Copy ETHERTSM.NLM, MSM.NLM from NETWARE 4.0 CD ROM or Diskette copy L:\NETWARE.40\________\LANDRV\ETHERTSM.NLM B: copy L:\NETWARE.40\________\LANDRV\MSM.NLM B: 3. Install NetWare 4.x SERVER. L: (CD ROM drive) L:\NETWARE.40\ENGLISH\INSTALL 4. Loading the LAN driver. Choose a LAN driver that corresponds to the network interface board in the server, repeat this step for any additional drivers. 1) Press to load a LAN driver not listed. 2) Press to specify a different path, > B:\ ( Put D-Link LAN driver into the diskette drive which contains ETHERTSM.NLM and MSM.NLM ) 3) Netware will display the list including the additional new driver. Select the new LAN driver to install. NWDE65N.LAN D-Link DE-650 LAN Driver 4) Set driver NWDE65N parameters such as following : Port value : 300H Node address : Frame type = Ethernet_802.2 Retries = 5 5) Bind the interface card to a protocol assign a unique IP Network address to bind IPX to NWDE65N. (frame Ethernet_802.2) 6) Proceed and finish with installation. ODI Client for DOS =================== D-Link ODI Driver allows you to load multiple protocol stacks. It also allows you to install up to two network adapters in a workstation. D-Link ODI driver supports "port, node address and frame" options. You can use these options to customize the NET.CFG file. For detailed info on Keywords, please refer to Novell manual "NetWare ODI shell for DOS - NET.CFG options". Please install the NetWare ODI client driver files following the procedures as described in the NetWare installation guide. If you want to generate your own NetWare ODI client driver, please do the following: 1) Make a backup of WSDRV_1 diskette. 2) Copy the appropriate DE65NODI.COM, DLKDRVS.DOS and DE65NODI.INS driver files to DOS directory of WSDRV_1 diskette (or backup): Insert D-Link driver diskette in A: driver. Insert NetWare WSDOS_1 diskette in B: driver. >Copy A:\IBMPC\NETWARE\NW40\ODI.DOS\*.* B:\DOS -- For NetWare client workstation. Append contents of DLKDRVS.DOS to DRIVERS.DOS. Contents of DLKDRVS.DOS is as follows: " D-Link DE-100 Ethernet for ISA,DE100ODI.COM,DE100ODI.INS,IE0 D-Link DE-200 Ethernet for ISA,DE200ODI.COM,DE200ODI.INS,IE0 D-Link DE-220 Series Ethernet for ISA,DE220ODI.COM,DE220ODI.INS,IE0 D-Link DE-320 Ethernet for Micro Channel,DE320ODI.COM,DE320ODI.INS,00M D-Link DE-400 Ethernet for EISA,DE400ODI.COM,DE400ODI.INS,0E0 D-Link DE-600 Ethernet Pocket LAN,DE600ODI.COM,DE600ODI.INS,IEM D-Link DE-620 Ethernet Pocket LAN,DE620ODI.COM,DE620ODI.INS,IEM D-Link DE-650 Ethernet PCMCIA,DE65NODI.COM,DE65NODI.INS,IEM " 3) Execute Novell's INSTALL program, which resides in the WSDOS_1 diskette. When you are asked to install the driver for your network board, press the Enter key. You will be asked to insert a WSDRV_1 diskette. Insert this diskette (or backup) which contains DE65NODI.COM, DRIVERS.DOS and DE65NODI.INS in drive A. 4) Follow the NetWare Client Install normal installation procedures, Which resides in the WSDOS_1 diskette. When asked to select a network driver, simply choose "D-Link DE-650 PEMCIA Ethernet Card" for selecting parameter like as Base I/O Port, Media Frame Type(s) and Optional Node Address. Upon completion, a new NET.CFG file will be created in your DOS directory. A typical of NET.CFG is as follows: Link Driver DE65NODI PORT 300 FRAME Ethernet_802.2 : NetWare DOS Requester FIRST NETWORK DRIVE = F : 5) A typical startnet.bat for ODI workstation is as follows: SET NWLANGUAGE=ENGLISH -- Set NetWare 4.x to English language. LSL -- Link Support Layer Module provided by Novell. DE65NODI -- Hardware Specific Module provided by D-Link. IPXODI -- IPX Protocol Stack Module provided by Novell. VLM -- DOS Support Module provided by Novell. F: -- Change to connected device. LOGIN .ADMIN.NV40SRV -- Login to file server NV40SRV as user ADMIN. 6) You may run STARTNET to access the Novell network.