MS Windows for Workgroups 3.11 Using a D-Link Card: 旼You will need:컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 쿘S Windows for Workgroups 3.11 Disks. � 쿥INUP9.EXE archive from Novell (ONLY if you use a Novell Server.) � � � 쿟he WINUP9.EXE files can be found on D-Link's BBS. � � (714) 455-1779 & (714) 455-9616 � � 9600-2400 baud, 8 bit, No Parity, 1 Stop bit, Full Duplex � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 旼What step to start with:컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 쿔f you use a Novell Netware Server, start at Step 1. � 쿔f you DON'T use a Novell Netware Server, start at Step 2. � 쿔f you already installed MS Windows for Workgroups 3.11, then� � 1. Run (click on) the Network Setup icon in Windows. � � 2. Start at Step 3. � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� Step 1 If you will be using Novell with Windows for Workgroup, then you MUST setup your computer to LOGIN to the NetWare Server with ODI drivers BEFORE you start installing Windows. Instructions, for using ODI drivers, are located in the A:\NETWARE\README.DOC file on your network card's driver disk. Step 2 Start installing Windows. A:\>SETUP The Network settings come later in the setup process. Follow the Windows manuals for help until you get to the Network setup screens. Step 3 You will see this screen: �袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴�NETWORK SETUP袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴敲 붚횼etwork Settings:컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � 볐 Setup will install Windows support for the following [Networks]� � 볐 network(s) on your computer: � � 볐 Microsoft Windows Network (version 3.11) � � 볐 � � 볐 � � 볐 You can share your files and printers with others. [Sharing ]� � 볐 � � 볐 �Network Drivers:컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 [Drivers ]� � 볐 � NE2000 Compatible [ODI/NDIS3] � � � 볐 � Microsoft NetBEUI � � � 볐 � IPX/SPX Compatible Transport with NetBIOS� � � 볐 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� Notes: The Network Driver can be changed with the DRIVERS button. If you are using a Novell Server, a card that isn't NE2000 compatible, or the card name displayed is wrong, then press the DRIVERS button and do Step 4. Step 4 The DRIVERS button was pressed from Step 3: �袴袴袴袴袴袴袴袴袴袴袴袴袴�NETWORK DRIVERS袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴敲 붚횼etwork Drivers:컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� [Cancel ] � 볐旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴엿 [Add Adapter ] � 볐�(This will show the Card and Protocols) 납 [Add Protocol] � 볐�(This may be blank at this point) 납 [Remove ] � 볐읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴冒 [Setup ] � 볐 [Set As Default Protocol] � [Help ] � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 붚횯efault Protocol컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � 볐 Microsoft NetBEUI � � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� Notes: If the Network Drivers box doesn't show the right card, then press the REMOVE button, then press the ADD ADAPTER button (Step 5). If you are using a Novell Server (requires ODI), then press the SETUP button (Step 7). Step 5 The ADD ADAPTER button was pressed from Step 4: �袴袴袴袴袴袴袴袴袴袴袴袴袴袴ADD NETWORK ADAPTER袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� � Select a Network Adapter to Install: � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 [ OK ] � � 쿢nlisted or Updated Network Adapter � [Cancel] � � �3Com EtherLink 16 � [Detect] � � �3Com EtherLink II � [Help ] � � �. � � � �. � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� Notes: If you have downloaded the D-Link Drivers (WWG311.EXE, as discussed at the top of this document), then choose 'Unlisted' and go to step 6. If you have a D-Link card that is compatible to the NE-2000 card (DE-200 or DE-220), then you can choose 'Novell/Anthem NE2000' or 'NE2000 Compatible' and go to step 7. Step 6 'Unlisted' was chosen from Step 5: �袴袴袴袴袴袴袴袴袴�INSTALL DRIVER袴袴袴袴袴袴袴袴袴袴敲 � Insert unlisted, updated, or [ OK ] � � vendor-provided network driver disk in: [Cancel] � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� [Browse] � � 쿌:\ � [ Help ] � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴暠 Note: Change the 'A:\' to the directory that has the new drivers. (ex: C:\WWG311) �袴袴袴�UNLISTED OR UPDATED NETWORK ADAPTER袴袴袴袴袴袴� � Network Adapters: [ OK ] � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� [Cancel] � � 쿏-Link DE-100 � [ Help ] � � 쿏-Link DE-150 � � � 쿏-Link DE-200/DE-205 � � � �. � � � �. � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴暠 Note: Choose your D-Link card from the list, and click on the OK button. Step 7 Set the Hardware settings to match what the card is using: �袴袴袴袴袴袴袴袴袴袴袴袴袴�NETWORK DRIVERS袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴敲 붚횼etwork Drivers:컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� [Cancel ] � 볐旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴엿 [Add Adapter ] � 볐쿏-Link DE-200 (or NE2000 or other D-Link card) 납 [Add Protocol] � 볐� Microsoft NetBEUI 납 [Remove ] � 볐읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴冒 [Setup ] � 볐 [Set As Default Protocol] � [Help ] � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 붚횯efault Protocol컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � 볐 Microsoft NetBEUI � � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� Note: Press the SETUP button. �袴袴袴袴袴袴袴袴�D-LINK (name of the card)袴袴袴袴袴袴袴袴敲 붚횴ardware Settings컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 [ OK ] � 볐 Interrupt: 3 � [Cancel] � 볐 Base I/O Port: 0x0300 � [ Help ] � 볐 Base Memory Address: (Automatic or Unused) � � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 붚횯river Type컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � 볐 Real Mode NDIS Driver � � 봉컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� Notes: If the Interrupt, Base I/O or Base Memory settings don't match the settings on your card, then change them here. If any of the lines say 'Automatic or Unused' then you don't have to set that line. If you use a Novell Server and have done Step 1, then change the DRIVER TYPE to 'ODI Driver'. It's a drop down list. There are a few choices for the DRIVER TYPE: Real Mode and Enhanced Mode NDIS Driver (only some cards) Enhanced Mode NDIS Driver (only some cards) Real Mode NDIS Driver ODI Driver Step 8 If you are installing Windows for Workgroups for the first time, these screens will come up: �袴袴袴袴袴袴袴MICROSOFT WINDOWS NETWORK NAMES袴袴袴袴袴袴袴敲 � These names identify you... [ OK ] � � User Name: John [Help] � � Workgroup: WORKGROUP � � Computer Name: John � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴暠 Note: Press the OK button. Step 9 If you install using an ODI driver (for Novell), then you may get this message box: �袴袴袴袴袴袴NOVELL NETWARE (WORKSTATION SHELL 3.X)袴袴袴袴袴袴袴� � The file NETWARE.DRV, which is required for this [Browse] � � component, is not included with this version of [ Scan ] � � Windows. [ Help ] � � The file may be on one of the disks provided by � � your vendor. If you do not have this file, contact � � your vendor. � � Enter a path where Setup can copy the file from: � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � � 쿎:\WINDOWS � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � � [ OK ] [ Skip ] [Cancel] � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴暠 Notes: This screen repeats for NETWARE.HLP, NWPOPUP.EXE, VIPX.386 and VNETWARE.386. These are the files included in WINUP9.EXE as discussed at the top of this document. You will need to get these files before you can continue! Examples: CONFIG.SYS: Adds: DEVICE=C:\WINDOWS\IFSHLP.SYS (to the end of CONFIG.SYS) LASTDRIVE=P STACKS=9,256 AUTOEXEC.BAT: Adds C:\WINDOWS\SMARTDRV.EXE (to the top of AUTOEXEC.BAT) SET TEMP=C:\WINDOWS\TEMP C:\WINDOWS\NET START C:\WINDOWS\ODIHLP.EXE (If you use the Novell ODI drivers) SETUP [/N] [/I] [/O:file] [/S:path] [/B] [/T] [/C] [/A] [/H:file] [/F] /N - Sets up a shared copy of Windows from a network server. /I - Ignores hardware detection. /O:file - Specifies the SETUP.INF file. /S:path - Specifies a path to the setup disk(s). /B - Use monochrome monitor on a CGA card. /T - Searches the drive for TSR programs? /C - Turns off the search for TSR programs. /A - Administrative setup. Places ALL Windows files on a network server, and marks them read-only. /H:file - Batch mode setup. This file has system settings so the user doesn't have to type anything. /F - Forces network card detection. 'WFW311.INS' by RCZJ on 5/9/94