July 1993
		   PC-NFS Driver Installation
			      for
	DE-621 Duplex and DE-620 Ethernet Pocket LAN Adapter
	====================================================

Thank you for purchasing the D-Link Duplex for desktop, laptop
and notebook PCs to retain DE-620 and printer or key card connection.

Before you installing driver program, please refer to DE-620 or DE-621
manual to get more detail installation. A simple installation is as the
following figure.


				     ÄÄÄÄ
				   /	/³
				 /    /  ³
			       /    /	*³<------- connect to DE-620 only
			      ÚÄÄÄÄ¿  *  ³
 connect     |\ 	      ³    ³*	*³<------- connect to printer or
 to pc	     |.|	  ÚÄÄÄÙ    ³  *  /	   key card
 printer <-- |.|ÍÍÍÍÍÍÍÍÍͳ DE-621 ³*  /
 port	     |.|	  ³	   ³ /
	     |/ 	  ÀÄÄÄÄÄÄÄÄÙ





The D-Link PC-NFS Driver Program lets you run Sun MicroSystems PC-NFS
on your PC with the D-Link Ethernet Pocket LAN Adapter.

The following files will be used in this installation:

Files		Contents
-----------	----------------------------------------------------------
PDNFS.SYS	PC-NFS Driver Program
DE620PD.SYS	Packet driver program for DE-620 card
DE620PD.COM	Packet driver program for DE-620 card

Two methods can be used to install:

METHOD 1:

1. Install the PC-NFS program according to the procedure described in the
   PC-NFS manual.  On the screen of the PC-NFS install program, select 3C501
   (the 3Com EtherLink card) as your network interface card. When the screens
   prompt you, select 3 for the interrupt level (IRQ), and select 300h for
   the base I/O address.

2. Copy the following files to the \NFS directory of your hard
   disk:

     PDNFS.SYS
     DE620PD.SYS
     DE620PD.COM

3. Modify the CONFIG.SYS file as follows:

   DEVICE=C:\ANSI.SYS
   DEVICE=C:\NFS\PCNFS.SYS /m
   DEVICE=C:\NFS\SOCKDRV.SYS
   DEVICE =C:\NFS\DE620PD.SYS <packet_int_no>
   DEVICE=C:\NFS\PDNFS.SYS
   LASTDRIVE=V

     AUTOEXEC.BAT file:

     SET PATH = C:\; C:\NFS
     SET TZ=EST5EDT
     SET NFSDRIVE = C
     NET YPDOMAIN ypserver
     NET START RDR
     NET YPSET homer
     NET NAME john
     NET USER F: \\user\john

       We use the name "john" here as an example.

Notes:

<packet_int_no> is the software interrupt vector number used by the packet
		driver program, which can be from 96 to 128.

4. Reboot the PC to start PC-NFS.

You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.


METHOD 2:

1. Install the PC-NFS program according to the procedure described in the
   PC-NFS manual.  On the screen of the PC-NFS install program, select 3C501
   (the 3Com EtherLink card) as your network interface card. When the screens
   prompt you, select 3 for the interrupt level (IRQ), and select 300h for
   the base I/O address.

2. Copy the following files to the \NFS directory of your hard
   disk:

     PDNFS.SYS
     DE620PD.SYS
     DE620PD.COM

3. Modify the CONFIG.SYS file as follows:

	DEVICE=C:\ANSI.SYS
	DEVICE=C:\NFS\PCNFS.SYS /m
	DEVICE=C:\NFS\SOCKDRV.SYS
	DEVICE=C:\NFS\PDNFS.SYS
	LASTDRIVE=V

     AUTOEXEC.BAT file:

	SET PATH = C:\; C:\NFS
	SET TZ=EST5EDT
	SET NFSDRIVE = C
	DE620PD <packet_int_no>
	NET YPDOMAIN ypserver
	NET START RDR
	NET YPSET homer
	NET NAME john
	NET USER F: \\user\john

       We use the name "john" here as an example.

Notes:
<packet_int_no> is the software interrupt vector number used by the packet
		driver program, which can be from 96 to 128.

4. Reboot the PC to start PC-NFS.

You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.