July 1993

		3Com 3+ Share Driver Installation
			       for
		 D-Link DE-621 Duplex and DE-620
	       ==================================

Thank you for purchasing the D-Link Duplex for desktop, laptop
and notebook PCs to retain DE-620 and printer or key card connection.

Before you installing driver program, please refer to DE-620 or DE-621
manual to get more detail installation. A simple installation is as the
following figure.


				     ÄÄÄÄ
				   /	/³
				 /    /  ³
			       /    /	*³<------- connect to DE-620 only
			      ÚÄÄÄÄ¿  *  ³
 connect     |\ 	      ³    ³*	*³<------- connect to printer or
 to pc	     |.|	  ÚÄÄÄÙ    ³  *  /	   key card
 printer <-- |.|ÍÍÍÍÍÍÍÍÍͳ DE-621 ³*  /
 port	     |.|	  ³	   ³ /
	     |/ 	  ÀÄÄÄÄÄÄÄÄÙ




The D-Link 3COM 3+ Share Driver Program lets you run 3Com 3+ Share
on your PC with the D-Link Ethernet Pocket LAN Adapter.

The following files will be used in this installation:

Files		 Contents
-----------	 -------------------------
DE620PD.SYS	 DE-620 Driver Program
ETH.SYS 	 3Com 3+ Share Driver


1. Follow the installation procedure for 3Com EtherLink board.

2. Copy the program ETH.SYS from the Installation Diskette for
   the D-Link Ethernet Pocket LAN Adapter to the boot disk/diskette.
   This program will replace the program of the same file name
   (ETH.SYS) when you perform the installation procedure in step 1
   above.


3. In the CONFIG.SYS file on the boot disk/diskette, make sure
   you have the following two statements.  The order of these two
   statement must be as shown below.

     DEVICE = DE620PD.SYS <packet_int_no>
     DEVICE = ETH.SYS

You may now boot and start your 3COM workstation.

Notes:

<packet_int_no> is the software interrupt vector number used by the
		packet driver program, which can be from 96 to 128.