The information contained in this README file is to offer help with
connecting to your network using a Megahertz Lan only card (XJ10BT) or
Combo cards (XJEM3288, XJEM3336) and Windows 3.1 or Windows for Workgroups.

The entries in each of the following example files is in proper order.
However, these are only the entries needed to help in establishing a network
connection using a Megahertz card and Windows 3.1 or Windows for Workgroups.

After the card has been installed, look in the CONFIG.SYS, AUTOEXEC.BAT
and NET.CFG files to verify some entries:



CONFIG.SYS:

DEVICE=C:\DOS\EMM386.EXE NOEMS X=DXXX-DXXX  (Usually D000-D1FF)
LASTDRIVE=Z
DEVICE=C:\MHZ\ENABLE.EXE                
    (The default directory is MHZ, but it could be whatever you have
    named it.)



AUTOEXEC.BAT:
    (These three Drivers are ODI drivers and are usually located in the
    MHZ\ODI or NWCLIENT Directory)

C:\MHZ\ODI\LSL.COM 
C:\MHZ\ODI\MHZETH.COM                    
C:\MHZ\ODI\IPXODI.COM
C:\MHZ\ODI\VLM PS=Server Name
    (The server name is defined by your network administrator.)
    (The VLM driver needs to bind to a server, so declaring it this way
    gives the driver the information it needs).


     
NET.CFG:                                                                                                               
    (These are examples and may vary from machine to machine.)

PORT 320
INT 5
COMBASE 2E8
COMIRQ 3
    (The COMBASE and COMIRQ lines are only used for the Combo cards.)

Netware DOS Requester     
 FIRST NETWORK DRIVE = F
 NETWARE PROTOCOL = NDS BIND
 PREFERRED TREE = XXXX
 NAME CONTEXT "AAA.BBB.CCC"
    (The above entries will be different based on how your network is set up.
    Contact your network administrator for this information.)

MEDIA_TYPE 10BASET
ERX   7