Installation instructions for installing the NDIS3 driver for the
Megahertz XJ10BT or CC10BT or XJ10BC or CC10BC.

1) Start Windows for Workgroups.

2) Select the Network Icon.

3) Select Network Setup.

4) Select Drivers.

5) Select Add Adapter.

6) Select Unlisted or Updated Network Adapter.

7) Specify the location of the oemsetup.inf and mhzc92.386 files.  This is
   usually A:\NDIS3.

8) Select Okay.

9) Select "Megahertz XJ10B or CC10B"

10) Select the interrupt. 

11) Select the I/O address.

12) Select Close

13) Select Okay

14) The system will display a dialog box informing you of the update of
    protocol.ini and system.ini.

15) Select Okay.

16) Select Continue to continue your windows session or restart to reboot
    the system.  Before the network can be used the system must be rebooted.

17) Shutdown windows and reboot the system.

Note: 

1) If card and socket services is not installed on your system you must use
   ENABLE with the /o option, otherwise if card and socket services
   are installed, do not use ENABLE.  The following is an example
   of the command line to use:  c:\mhtz\enable.exe /o