3Com Corporation
NDIS 2.01 Drivers Installation Notes


 Banyan VINES
 ------------

 To install VINES 6.0 software on a DOS NDIS 
 workstation, follow these instructions.  DOS must be
 installed on the target workstation C: drive, or you
 must have a bootable DOS floppy.

 1.  Use the DOS MD command to create a subdirectory 
     called \VINES.

 2.  Copy the contents of the VINES LAN S/W (DOS) 
     Install diskette into the \VINES subdirectory.

 3.  Copy the contents of the NDIS subdirectory on 
     the VINES LAN S/W (DOS) 2 of 2 diskette into the 
     \VINES subdirectory.

 4.  Copy the PROTOCOL.INI fragment from the 
     \MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3 
     subdirectory on the EtherDisk diskette to the 
     \VINES subdirectory.

 5.  Copy 3CELCM.EXE and ELPC3X.DOS from the NDIS\DOS
     directory of the EtherDisk to the \Vines 
     subdirectory.

 6.  Edit the PROTOCOL.INI file to read as follows:

     [PROTOCOL MANAGER]
      DRIVERNAME = PROTMAN$

     [VINES_XIF]
      DRIVERNAME = NDISBAN$
      BINDINGS = ELINKPC3

     [ELINKPC3]
      DRIVERNAME = ELPC3$
         
 7.  Run the PCCONFIG.EXE program located in the 
     \VINES subdirectory.

 8.  Select option 1, Network Card Settings.

 9.  Select the NDIS Ethernet option.

 10. The NDIS workstation screen appears.  Enter the 
     IRQ that you selected for the EtherLink/PC Card 
     adapter.  Select the IRQ using the Configuration
     and Diagnostic Program.  

 11. Press F10 twice to return to the first menu.
     Select option 2, Login Environment Settings.  
     In the next screen select option 1, Default 
     Communications Driver.  In the next screen 
     scroll down to NDIS Ethernet and press enter.
     Exit PCCONFIG by pressing F10 at each stage to
     save the new configuration.

 12. Edit the CONFIG.SYS file and add the following 
     lines, substituting A: for C: for a floppy 
     disk installation.
                                   
     DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES
     DEVICE = C:\VINES\3CELCM.EXE
     DEVICE = C:\VINES\ELPC3X.DOS

 13. Add the following line to the AUTOEXEC.BAT
     file.

     cd \VINES
     BAN
     cd \

     BAN loads the NDISBAN drivers and reads the 
     PCCONFIG.DB file to invoke changes made during the
     PCCONFIG stage.

=========================================================
SYSTEM.INI information
=======================
   In order for the modem to function correctly 
in MS Windows, add the following commands to your 
Window's  SYSTEM.INI file under the [386Enh] category:   
(In case they are not there already)

[386Enh]
     :
     :
COM1Base=3F8
COM1Irq=4
COM2Base=2F8
COM2Irq=3
COM3Base=3E8
COM3Irq=4
COM4Base=2E8
COM4Irq=3

=========================================================

=========================================================

Please Note
============

 Although the driver name is ELPC3X.DOS, the internal 
 driver name (used in PROTOCOL.INI) is ELPC3$                                  
=========================================================
                                
                                
                                
(%VER NDIS - Banyan VINES v2.0e)