This driver diskette contains one EISA configuration directory and five other driver directories for DOS, Windows NT and NetWare. OS/2 driver is under ROOT directory. A DOS driver installation file (INSTALL.EXE), which resides in the directory, can help you install the drivers by auto-updating the AUTOEXEC.BAT & CONFIG.SYS files. ***************************************************************************** * * * In this diskette * * ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ * * * * This readme file provides information for: * * A. Discussion of "DOS 5 Support" and "Max Disk Capactity" Options * * 1. Files under the directory: EISA Configuration Utility * * 2. Files under the directory: ASPI Drivers * * 3. Files under the : NetWare 3.10 * * 4. Files under the : NetWare 3.11/3.12/SFT-III * * 5. Files under the : NetWare 4.00/4.01/4.02/4.10 * * 6. Files under the root directory for OS/2 v2.0/2.1/2.11/WARP 3.0 * * 7. Files under the : Windows NT 3.1/3.5 Drivers * * * ***************************************************************************** A. Working with ">1GB HDD support" under assorted operating systems The following table indicates how to support >1GB HDD under assorted operating systems by changing the settings: "Max DOS disk Capacity" & "DOS 5 Support Enabled/Disabled". It also shows where the installation of device drivers is a MUST under certain Operating Systems. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ O.S. ³ DC-8X0/3X0 ³ "Max DOS disk ³ "DOS 5 ³ Tekram ³ ³ ³ SUPPORT >1G ³ Capacity" ³ Support" ³ driver ³ ³ ³ ³ option ³ option ³ INSTALLED? ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ DOS ³ Yes ³ > 1G ³ Enabled ³ No ³ ³ (Windows/WFWG) ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ OS/2 2.x/3.0 ³ Yes ³ 1G ³ Disabled ³ Yes ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ WINDOWS NT 3.X ³ Yes ³ 1G ³ Disabled ³ Yes ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ NETWARE V3.1X ³ Yes ³ 1G ³ Disabled ³ Yes ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ NETWARE V4.0X ³ Yes ³ 1G ³ Disabled ³ Yes ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ SCO UNIX ³ Yes ³ 1G ³ Disabled ³ No ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ SOLARIS V2.4 ³ Yes ³ 1G ³ Disabled ³ No ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ UNIXWARE V1.1 ³ Yes ³ 1G ³ Disabled ³ No ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÙ * "OS/2 v2.x/3.0 + >1GB HDD" => Special care is needed to achieve this. Specify <1GB capacity for the PRIMARY partition and leave the rest of the HDD capacity as the EXTENDED partition. The procedure should work like this: 1. During installation, specify your own installation partition and not the PRE-DEFINED partition. 2. You can then create a partition of less than 1024MB. 3. Re-boot the system and install DC-3X0/8X0's OS/2 driver. 4. Re-boot and use FDISK to create an EXTENDED partition for the rest of the hard disk. 1. : Contains EISA configuration files, overlay files, and an advanced setup utility for MCS or other ECUs. 1.1. : (advanced utility already included) a. DC-820 => copy both the !TRM0820.CFG and TRM0820.OVL to your ECU diskette. b. DC-320B => copy both the !TRM0320.CFG and TRM0320.OVL to your ECU diskette. c. DC-820B => copy both the !TRM820B.CFG and TRM820B.OVL to your ECU diskette. d. DC-320E => copy both the !TRM320E.CFG and TRM320E.OVL to your ECU diskette. 1.2. : (other ECUs, such as AMI ... etc.) a. DC-820 => copy the !TRM0820.CFG to your ECU diskette. b. DC-320B => copy the !TRM0320.CFG to your ECU diskette. c. DC-820B => copy the !TRM820B.CFG to your ECU diskette. d. DC-320E => copy the !TRM320E.CFG to your ECU diskette. Note: All *.CFG files in the \CF\OTHER subdirectory can work without the *.OVL files under ALL ECUs. All functions are supported by ACF20SU.EXE. 2. : Contains ASPI drivers and utilities. 2.1. ASPIBME.SYS : ASPI driver 2.2. DISKDRV.SYS : ASPI driver for HDD and removable media devices 2.3. TFDISK.EXE : DOS compatible disk partition utility 2.4. TOOLBME.EXE : Low-level format, mirroring initialization, disk image copy/compare, & error logging utilities 2.5. CHKDRIVE.EXE: Logical drives status checking utility 2.6. ASPICD.EXE : CD-ROM driver 2.7. INSTALL.EXE : This is a DOS driver installtion utility that helps you install the device drivers for HDDs, removable media, CD-ROM, and tapes by auto-updating the CONFIG.SYS and AUTOEXEC.BAT files. 3. : Contains drivers for Netware v3.10. 3.1. NV310BME.DSK: disk driver / ASPI manager. 3.2. BELOW16.DSK: memory allocator for memory below 16 Meg. 3.3. ASPITRAN.DSK: ASPI transport layer driver. 4. : Contains drivers for Netware v3.11/v3.12/SFT-III. 4.1. NV31XBME.DSK: disk driver / ASPI manager. 4.2. ASPITRAN.DSK: ASPI transport layer driver. 5. : Contains drivers for Netware v4.00/4.01/4.02/4.1. 5.1. NV40XBME.DDI: installation configuration file. 5.2. NV40XBME.DSK: disk driver / ASPI manager. 5.3. ASPITRAN.DSK: ASPI transport layer driver. 5.4. README.NW: Some Notes on Installation. 6. OS/2: Contains 4 files under the root directory of this driver diskette for OS/2 versions 2.0/2.1/2.11/WARP 3.0. 6.1. README.OS2 : Procedures for driver Installation and Removal 6.2. TRMSCSI.EXE: Execution file for DDINSTAL 6.3. TRMSCSI.ADD: SCSI Device Driver 6.4. TRMSCSI.DDP: SCSI Device Driver Profile 7. : Contains drivers for Windows NT v3.1/3.5 7.1. README.NT : Procedures for driver Installation and Removal 7.2. OEMSETUP.INF: Setup Information File 7.3. DCSCSI.SYS : SCSI Driver 7.4. DCSCSI : Setup Tag File 7.5. TXTSETUP.OEM: Setup Tag File