QLogic Fast!SCSI/QLA400 Miniport Driver for Windows NT

				    Version 1.31              March 8, 1994



* This release has been tested with Windows NT Version 3.1


* The following files are on this disk for supporting Windows NT:

    TXTSETUP.OEM        Driver installation script for initial Windows NT
			text setup

    \NT\OEMSETUP.INF    Driver installation script for Windows NT Setup
			program

    \NT\QL40WNT.SYS     Windows NT miniport driver for QLogic Fast!SCSI/QLA400

    \NT\README.TXT      This file


* To initially install Windows NT on a SCSI disk attached to the Fast!SCSI/QLA400
  or to install Windows NT from a CD-ROM player attached to the Fast!SCSI/QLA400:

    1. Insert Windows NT "Boot Disk" and reboot system
    2. Select "Custom Setup"
    3. Enter "S" to configure additional SCSI adapters and select "Other"
    4. Insert QLogic SCSI software diskette and press ENTER
    5. Select "QLogic Fast!SCSI/QLA400" and press ENTER
    6. Continue with standard installation procedure


* To install the QLogic Fast!SCSI/QLA400 miniport driver on installed NT system:

    1. Select "Windows NT Setup" from Main program group
    2. Select "Options" from Windows NT Setup window
    3. Select "Add/Remove SCSI Adapter" from menu
    4. Select "Add" from SCSI Adapter Setup window
    5. Select "Other" from the list of supported adapters
    6. Insert QLogic SCSI software diskette
    7. Enter "A:\NT" for path to NT driver and select "OK"
    8. Choose "QLogic Fast!SCSI/QLA400" driver and select "OK"
    9. Select "Install" followed by "Continue" to install the driver


* After installing the QLogic miniport driver and rebooting NT, SCSI disk and
  CD-ROM devices will be automatically configured by NT.


* To install Windows NT drivers for supporting SCSI tape devices:

    1. Select "Windows NT Setup" from Main program group
    2. Select "Options" from Windows NT Setup window
    3. Select "Add/Remove Tape Devices" from menu
    4. Select "Add" from Tape Device Setup window
    5. Select desired tape driver from the list of supported tape devices
    6. Select "Install"
    7. Insert Windows NT CD-ROM and enter device letter and path to the
       Windows NT installation files ("D:\I386")