Driver for Windows NT README File	     Version 1.10


     +===================================================================+
     |	Microsoft Windows NT version 3.1 disk driver for Disk Accelerator|
     +===================================================================+

     You only need this driver under the following situations:

     - You want to install TURBO mode under Windows NT.
     - Your Disk Accelerator is installed as the PRIMARY disk controller
       with more than two IDE drives attached.
     - Your Disk Accelerator works as the SECONDARY disk controller.


     ****** Install the Driver ******

     Please follow the steps below to install the driver.

     1. Boot with Windows NT 3.1.

     2. Type the following command in the "Command Prompt" window:

	   A:\NT\NTINS

     The driver will be installed automatically.


     ****** Removing the Driver ******

     After installing the driver, if you want to remove the driver,
     please type the following command in the "Command Prompt" window:

	  NTUNINS

     The driver will be removed automatically.