DC5030 Main Board SCAN REPORT
	=============================

	1. Saturn chipset (486)

	   Brand     : J.bond (PCI400C-A)
	   BIOS      : Phoenix BIOS V1.03
	   Coretest  : 23989 (Master, Burst)
	   Interrupt : INT #A (use PCI3 slot)
	   MB Jumper setting :
		       PCI3 INTA to IRQ14
	   MB BIOS Setting :
		       a. Disable External Cache
		       b. Select PCI3 to IRQ14
		       c. PCI3 : Device  : Enable
				 Master  : Enable
	   DC5030    : Default Setting


	2. Saturn chipset (486)

	   Brand     : FIC
	   BIOS      : AMI BIOS V1.02
	   Coretest  : 23567 (1M SIMM * 4, Master, Burst)
	   Interrupt : INT #D (use PCI1 slot)
	   MB Jumper setting :
		       JN1 : short 1-2
		       JN2 : short 1-2
	   MB BIOS Setting :
		       Slot 1 INT select : Free
	   DC5030    : Disable Configuration Register (JP6 short 1-2)



      **3. Contaq chipset (486)

	   Brand     : Soyo
	   BIOS      : AWARD V4.50G
	   Coretest  : 20446 (1M SIMM * 4, Master)
	   Coretest  : 20009 (1M SIMM * 2, Master)
	   Interrupt : INT #A


	4. ALI chipset (486)

	   Brand     : ASI (MB-4D50AG)
	   BIOS      : Phoenix BIOS V4.03
	   Coretest  : 10456 (1M SIMM * 4, Master)
	   Interrupt : INT #B (Slot 2)
	   MB BIOS Setting :
		       PCI Device setup
			 PCI Device, Slot #2
			   Slot # : INT B
			   Enable device : Enable
			   Enable Master : Enable
			   IRQ line      : [14]
			   Latency timer value : [40]
		       Advance chip-set-control
			   PCI Master Cycle : Slow
	   DC5030    : Default Setting (Select INT #B)

	5. ALI chipset (486)

	   Brand     : MicroStar (MS-4134)
	   BIOS      : AMI BIOS AL54
	   Coretest  : 17128 (1M SIMM * 4, Master)
	   Interrupt : INT #A (slot 1)
	   MB Jumper setting :
		       JP12 : short 2-3
	   MB BIOS Setting :
		       Advance chipset Setup
			 PCI Master Multi Data trans. : Enable
			 PCI Slot n int A#'s IRQ select : None
	   DC5030    : Default Setting


	6. Opti chipset (486) 82C802G 82C822

	   Brand     : Opti
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 8727 (1M SIMM * 4, Master)
	   Interrupt : INT #A (Slot 1)
	   MB BIOS Setting :
			 External BIOS shadow disable.
			 Note : External BIOS must be shadow-disabled,
				otherwise the Enternal BIOS will disappear.
	   DC5030    : Disable Configuration Register (JP6 short 1-2)

      **7. Saturn II chipset (486)

	   Brand     : ASUSTek
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 20201 (1M SIMM * 4, Master)
	   Interrupt : INT #A (Slot 1)
	   Note      : The system can not boot when the "PCI to DRAM write
		       buffer" is enabled and "Cache update scheme" is Wr-Through.

	8. VIA chipset (486) VT82C505, VT82C486

	   Brand     : VIA
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 24212 (1M SIMM * 4, Master)
	   Interrupt : INT #A
	   MB BIOS Setting :
		       Chipset Feature Setup:
			 Burst Write : Disabled
		       PCI Configuration Setup:
			 Slot 1 location : 08
			    Slot using IRQ : 14
			    Latency timer  : 60
			 INT A using IRQ   : 10/14
			 IRQ mode : Transparant Invert
			 PCI master write BUFFER : Diaabled
			 Local Memory Select Point : Slow
			    Note : The system can not boot when the
				   "PCI master write BUFFER" is enabled.
	   Coretest  : 29834 (1M SIMM * 4, Master) when CPU Write Back Cache
		       is Disabled in CHIPSET FEATURES SETUP.
	   DC5030    : Default Setting


	9. Aries chipset (486) S82426EX, S82425EX

	   Brand     : ASUSTek (PVI-486AP4)
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 3588 (1M SIMM * 4, Master), 7227 (1M SIMM * 4, Slave)
	   Interrupt : INT #A (use PCI-1)
	   MB Jumper setting :
		       JP5 short 1-2 to select PCI-1 to IRQ14
	   DC5030    : Disable Configuration Register (JP6 short 1-2)



       10. Mercury chipset (Pentium)

	   Brand     : J.bond (Intel APAC OEM MKT)
	   BIOS      : Phoenix BIOS V1.03
	   Coretest  : 8495 (1M SIMM * 4, Master)
	   Interrupt : INT #A (use PCI1 Slot)
	   MB Jumper setting :
		       JP112 short to select IRQ14
	   MB BIOS Setting :
		       Select PCI1 to IRQ14
	   DC5030    : Default Setting



       11. Mercury chipset (Pentium)

	   Brand     : Chaintech
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 8275 (1M SIMM * 4, Master)
	   Interrupt : INT #A (use Slot 1)
	   MB Jumper setting :
		       JP6 short to select INT#A to IRQ14
		       JP25,JP26: Short 2-3 to Disabled the on board IDE.
	   MB BIOS Setting :
		       External BIOS Shadow Enabled
	   DC5030    : Default Setting



       12. Mercury chipset (Pentium)

	   Brand     : Chaintech
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 14195(1M SIMM * 4, Master)
	   Interrupt : INT #A (use Slot 1)
	   MB Jumper setting :
		       JP6 short to select INT#A to IRQ14
		       JP25,JP26: Short 2-3 to Disabled the on board IDE.
	   MB BIOS Setting :
		       External BIOS Shadow Enabled
		       PCI to DRAM write BUFFER : Enabled
	   DC5030    : Default Setting



     **13. Mercury chipset (Pentium)

	   Brand     : ASUSTek
	   BIOS      : AWARD BIOS V4.50
	   Coretest  : 8164 (1M SIMM * 4, Master)
	   Interrupt : INT #A



       14. Mercury chipset (Pentium)

	   Brand     : FIC
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 8178 (1M SIMM * 4, Master)
	   Interrupt : INT #A (use Slot 1)
	   MB Jumper setting :
		       JI6 : short 1-2
		       J18 : short 2-3
	   DC5030    : Default Setting

	   Note : Windows enhance mode : Used the Slot Card and JI6 don't
		  short.



       15. Intel NEPTUNE chipset (Pentium) S82434LX, S82375EB, S82374EB

	   Brand     : ASUSTek (PCI/E-P5MP4)
	   BIOS      : AWARD BIOS V4.50
	   Coretest  : 16130 (1M SIMM * 4, Master)
	   Interrupt : INT #A (use Slot 1)
	   MB Jumper setting :
		       JP17 : short 1-2 to select IRQ14
	   MB BIOS Setting :
		       External BIOS Shadow Enabled
		       Note : External BIOS must be shadow-enabled,
			      otherwise the system can not boot.
	   DC5030    : Default Setting

	   Note : Windows enhance mode : Used the Slot Card and JP17 don't
		  short.



       16. Opti chipset (P54C) 82C596, 82C597

	   Brand     : Opti (from USA)
	   BIOS      : AMI Release 050294 (Plug and Play BIOS Extension Version
		       2.07
	   Coretest  : 7903 (1M SIMM * 4, Master)
	   Interrupt : INT #A
	   MB BIOS Setting :
		       ChipSet setup:
			 PCI IDE Card Present in : Slot 3
			 PCI IDE Connect to : INTA
			 PCI IDE IRQ : Level
		       External BIOS Shadow Enabled
		       Note : External BIOS must be shadow-enabled,
			      otherwise the system can not boot.
	   DC5030    : Default Setting (Don't set the external BIOS to DC000)


       17. Saturn chipset (486)

	   Brand     : MicroStar (MS-4127)
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 22407 (1M SIMM * 4, Master, Burst)
	   Interrupt : INT #B (use Master1 slot)
	   MB Jumper setting :
		       JP23 short to select IRQ14
	   MB BIOS Setting :
		       PCI to DRAM Write Buffer : Disabled
	   DC5030    : Disable Configuration Register (JP6 short 1-2)


       18. Mercury chipset (Pentium)

	   Brand     : Long-Shine
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 15599 (1M SIMM * 4, Master, CPU 66MHZ)
	   Interrupt : INT #A (use Slot PCI1)
	   MB Jumper setting :
		       JP4 : short 1-2 to select IRQ14
	   DC5030    : Default Setting (U23 must rework for 66Mhz)


       19. UMC chipset (486) UM8886,UM8881

	   Brand     : UMC (MS-4127)
	   BIOS      : Phoenix BIOS V4.03
	   Coretest  : 8065 (1M SIMM * 4, Master), 5877 (Slave)
	   Interrupt : INT #A (use PCI2 slot)
	   MB BIOS Setting :
		       Advance system setup
			 Large Disk DOS compability : [DIsabled]
			 External BIOS Shadow Enabled
			 Advance chipset control
			   IRQ14 Trigger : [Edge]
			 PCI Devices
			   PCI INTA# : [Single]
			   PCI Device, Slot 2:
			     Enable Device : [Enabled]
			     Enable Master : [Enabled]
			     PCI INTC#: [14]
			     Use Default Latency Timer Value : [Yes]
			     Latency Timer Value : [60]
	   DC5030    : Default Setting


       20. SIS chipset (Pentium) 85C501,85C503

	   Brand     : ASUSTek (PCI/I-P54SP4)
	   BIOS      : AWARD BIOS V4.50G
	   Coretest  : 14578 (1M SIMM * 4, Master)
	   Interrupt : INT #A (use PCI1 slot)
	   MB Jumper setting :
		       JP5 short 2-3 to disabe the on board PCI IDE
	   MB BIOS Setting :
		       External BIOS Shadow Enabled
		       PCI Configuration Setup
			 PCI Slot 1 (Right)
			   Latency Timer : 60 PCI Clock
			   Using IRQ : 14
			   Trigger/Routing : Level/Forced
	   DC5030    : Default Setting (U23 must rework for 66Mhz)