ADVANCD CD-ROM Driver
	=====================
ADVANCD.SYS is a Ggeneric CD-ROM driver for DOS/WINDOWS operating system.

For automatic installations, issue the following commands

DOS 

a:\install

WINDOWS 3.1 and Windows for Workgroup 3.11

run a:\dos\setup

The above programs will automatically insert these statements

DEVICE=C:\path\ADVANCD.SYS 
 
in CONFIG.SYS and

MSCDEX.EXE /D:ADVCD0

in AUTOEXEC.BAT

The ADVANCD.SYS will accept the /P, /L and /D:name parameters.

while

/P 
Pause after driver load.

/L
Specifies that ADAVNCD should scan for logical units.  (By 
default, logical units are not scanned)

/D:name    
Specifies the device name given the driver in your CONFIG.SYS 
file for use with your CD-ROM interface software.  (The 
default device name is ADVCD0, which will apply to all 
connected CD-ROM drives.)


	Technical Support
	=================

For Further information on using the ADVANCD software, 
configuration program, Advansys Host Adapter or this install 
program please refer to your AdvanSCSI manual or contact 
Advansys Technical Support:

    Telephone: (800) 525-7440 24 hours, 7 days a week

    Internet email: support@advansys.com

    BBS: (408) 383-9540

    World Wide Web:  www.advansys.com

						 11-04-96