README.TXT                   MATROX GRAPHICS INC.          February 25, 1997


                    MGA Mystique DOS Setup and Utilities
                             Revision 1.40.014

This disk contains the MATROX MGA Mystique DOS setup and utility programs.

Contents:
--------

   INSTALL.EXE    Install program
   FILES1.ZIP     Product files
   ENGLISH.ZIP    English localization files
   ENGLISH.MMF    English localization installation file
   PKUNZIP.EXE    File decompression  utility
   PRODUCTS.LST   Product list

Product files:
-------------

   MGAMON.EXE     Monitor program.
   MGA.MON        Monitor file.
   DOS4GW.EXE     DOS extender.
   UPDBIOS.BAT    Flash Eprom update batch file.
   PROGBIOS.EXE   Flash Eprom programming utility.
   *.BIN          Video bios binary file(s).
   VBETSR.COM     VBE video parameter customization TSR.
   VBESETUP.EXE   Required for VBETSR.COM.
   FNT8X14.COM    Font 8x14 TSR.
   PCISPY.EXE	  PCI configuration space utility.

Installation:
------------

   To install the setup and utility programs, run install.exe
   The default path for the installation is C:\MGA\SETUP\.

Monitor program (MGAMON.EXE):
----------------------------

   The MGAMON utility program allows to you to "optimize" your
   board/monitor configuration. It allows you select a monitor from
   our list of supported monitors. 

   Your selection will be saved in a file called MGA.INF. This file 
   is used by all the MGA drivers to determine monitor timing information.

Monitor file (MGA.MON):
----------------------

   This file contains the monitor information required by the MGAMON program.
   It contains video timings for a variety of monitors and should cover most
   monitors.

UPDBIOS.BAT Utility:
-------------------

   IF YOU HAVE JUST RECEIVED A NEW BOARD, IT IS NOT NECESSARY TO
   RUN THIS UTILITY.

   This batch file is used to update the flash bios on your MGA
   card to the latest revision at the time of release.
   It is necessary to run this utility only if you receive this
   software as part of an upgrade package.

   Should you need to use this utility, follow the procedure below :
   
        1) go to the C:\MGA\SETUP directory and simply type "UPDBIOS"
        2) once the utility has finished, power-down your system
        3) power-up your system and you are now ready to try your updated
           bios
          
   NOTE : This program may not work properly if invoked from a Windows
          DOS window (neither windowed or full-screen). It is recommended
          that this program be run directly from DOS.

FNT8X14.COM:
-----------
  The 8x14 font has been removed from the video bios. This was done, as per 
  VESA recommendations, in order to make room for VESA Bios features such as 
  VBE2.0 and VBE/DDC. Should the removal of this font cause problems with any 
  application you are running, it can be installed by running the FNT8X14.COM 
  TSR program. To do this, simply type c:\mga\setup\fnt8x14.

VBESETUP.EXE and VBETSR.COM Utilities:
-------------------------------------

   The VBETSR.COM/VBESETUP.EXE utilities allow the VESA VBE modes supported
   by our video bios to use the same video parameters as used by our drivers.
   This is a two step process. First, you must run VBETSR.COM by going to
   \MGA\SETUP and typing VBETSR. Second, from within the same sub-directory,
   you must run VBESETUP.EXE by simply typing VBESETUP. This program will
   load the video parameter information to be used by VBETSR.COM. These
   programs can be run from within your autoexec.bat by simply adding the
   following lines :

	C:\MGA\SETUP\VBETSR
        C:\MGA\SETUP\VBESETUP

   NOTE that VBESETUP must be re-run every time you modify your monitor
   configuration. In other words, every time you switch monitor or modify 
   the video timings in any way.


PCISPY.EXE Utility:
------------------

   PCISPY is intended for usage in PCI systems where we suspect problems
   arising from the way MGA devices are being mapped. 

   Usage of this utility is as follows and can be obtained by simply
   going to C:\MGA\SETUP and typing PCISPY :
       
       usage : pcispy [-l]
                      [-c]
                      [-r DeviceNumber Offset]
                      [-w DeviceNumber Offset Data]
                      [-d DeviceNumber Start_Offset End_Offset]

       where
       [-l] list PCI device information
       [-c] automatic conflict resolution involving MGA
       [-r] read byte from "Offset" (hexbyte) for "DeviceNumber"
       [-w] write byte "Data" to "Offset" (hexbyte) for "DeviceNumber"
       [-d] dump bytes from "Start_Offset" to "End_Offset" (hexbytes)
            for "DeviceNumber"
       
       **** Switches are mutually exclusive.

VESA MODES SUPPORTED (VBE Core 1.2/2.0):
---------------------------------------

 The following VESA modes are supported by the MGA Mystique

             |            Colors Supported
 Resolution  |	16        256       32K       64K     16.8M 
 ------------+----------------------------------------------
 640 x 400   |	VGA mode  100       NA	      NA      NA
 640 x 480   |	VGA mode  101       110       111     112 		
 800 x 600   |	102       103       113       114     115
 1024 x 768  |	NA        105       116       117     118(*)
 1280 x 1024 |	NA        107       119(*)    11A(*)   NA
 1600 x 1200 |	NA        11C       11D(*)    11E(*)   NA

 (*) Requires 4Mb of Video Memory