INSTRUCTIONS  FOR  INSTALLING  EVEREX  WINDOWS 3.0  DRIVERS
===============================================================================


step 1 - Install Windows 3.0 on your system if it is not already installed.

step 2 - Have your the Everex driver diskette(s) containing the Windows 3.0
         drivers ready.  Go to the hard disk which contains Windows 3.0,
         and change to the Windows 3.0 directory.  For example, CD \WIN3.

step 3 - Insert the Everex driver diskette in drive A.  Run the
         EVSETUP program to install the Everex Windows 3.0 drivers.  At the
         DOS type A:\WIN3\EVSETUP and hit ENTER key.

step 4 - EVSETUP program will ask you if you want to copy the Everex drivers
         to your hard disk, where Windows 3.0 is installed, answer yes by
         typing in "y".

step 5 - Run Windows 3.0 SETUP by typing in "setup" at the DOS prompt and
         hitting ENTER key.

step 6 - When SETUP program displays your current configuration, use arrow
         keys to highlight the "Display:...."  line then hit ENTER key.  A
         list of display options appears on your screen.

step 7 - Use arrow keys to highlight to the desired driver and hit ENTER key.
         Hit ENTER again (at the "Accept the configuration shown above" line)
         to accept the configuration as shown and exit the Windows SETUP
         program.

step 8 - Windows is now configured to run in your selected video resolution.


===============================================================================