GraphicsENGINE 64 PCI Utilities REV. 1.2 Installation: 1) Insert the GraphicsENGINE 64 Driver diskette into drive A. 2) Run the installation file INSTALL.EXE on drive A. Example: C:\>a:\install Then select INSTALL's GraphicsENGINE 64 PCI Utilities menu, press ENTER key and complete the installation INSTALL will copy the appropriate files to your default directory. Contents: 1) SMODE.EXE - allows you to select the EMULATION modes of the GraphicsENGINE card and the different graphics/text modes. Possible to select the VGA/CGA/MDA emulation and/or select a display mode. (ie. smode 54) 2) MONSET.EXE - NEW GraphicsENGINE 64 Video Mode Utility. This is an other TSR program; therefor, you can add the one line at the end of autoexec.bat to execute your monitor selection. ie. MONSET X WHICH ===> monset 0 (for 31.5-35.5 KHz.scan rate monitor) or monset 1 (for 31.5-38 KHz.scan rate monitor) or monset 2 (for 31.5-48 KHz.scan rate monitor) or monset 3 (for 31.5-57 KHz.scan rate monitor) or monset 4 (for 31.5-64 KHz.scan rate monitor) or monset 5 (for 31.5-78 KHz.scan rate monitor) or monset 6 (for 31.5-90 KHz.scan rate monitor) or monset 7 (for 31.5-95 KHz.scan rate monitor) 3) VGA_BIOS.EXE - To run TSR version BIOS. Only good for damaged EPROM or updated your current EPROM. ie: put into AUTOEXEC.BAT 4) BOX33.EXE - Testing program for all the VESA mode. ie: BOX 104 will give you a box of 1024 x 768 16 colors display.