This describes how to setup the device driver of CD-ROM Drive. 
This device driver is exclusive use of TOSHIBA ATAPI CD-ROM drive XM-5602B.

Option switches are:

/D:<device name>     Specifying the device name.
                     Must match the device name of MSCDEX.EXE.

/C:<turn stop time>  specifies the time which stop the drive motor
                     when not using CD-ROM drive.
                     The following values can be specified.
                     /C:1      125 ms
                     /C:2      250 ms
                     /C:3      500 ms
                     /C:4        1 s
                     /C:5        2 s
                     /C:6        4 s
                     /C:7        8 s
                     /C:8       16 s
                     /C:9       32 s     (Default)
                     /C:A        1 min
                     /C:B        2 min
                     /C:C        4 min
                     /C:D        8 min
                     /C:E       16 min
                     /C:F       32 min

/V:                  Display the detailed information on power up.

/B:                  Driver enables the DMA transfer.

Note:
There is the following restrictive item for (/B) option switch.
1. Driver supports DMA transfer only for Intel Triton PCI Chip Set.
2. If application buffer address (store CD-ROM data) is not word align,
   the driver will not DMA trnasfer. (Use PIO transfer)