Celebris XL / DECpc XL To access Multi-session CDs on Celebris XL and DECpc XL systems, with Toshiba SCSI CD-ROMs, you must install one of the following drivers. CDROM.SYS or SYMCD.SYS User must wait for CD-ROM access light to stop blinking before trying to access CD in the drive. All drives in the matrix below work with: o Kodak Cds o CD+ Cds (Must be run in Windows w/sound support) o Multivolume-Multisession (Must have software that allows Session selection) Toshiba Ver Spd On Screen Code Symbios Driver Version 2 Sess 4 Sess XM-4101B A01 2X XM4101TA3213 Cdrom.sys (3.03.04) YES YES XM-4101B A01 2X XM4101TA3213 Symcd.sys (4.00.00.06) YES YES XM-4101B A02 2X XM4101TA0064 Cdrom.sys (3.03.04) YES YES XM-4101B A02 2X XM4101TA0064 Symcd.sys (4.00.00.06) YES NO XM-5201B A01 3X XM5201TA3014 Cdrom.sys (3.03.04) NO NO XM-5201B A01 3X XM5201TA3014 Symcd.sys (4.00.00.06) YES YES XM-5201B A02 3X XM5201TA3254 Cdrom.sys (3.03.04) YES NO XM-5201B A02 3X XM5201TA3254 Symcd.sys (4.00.00.06) YES YES XM-5201B A03 3X XM5201TA0255 Cdrom.sys (3.03.04) YES YES XM-5201B A03 3X XM5201TA0255 Symcd.sys (4.00.00.06) YES YES XM-5301B A01 4X XM5301TA0925 Cdrom.sys (3.03.04) YES YES XM-5301B A01 4X XM5301TA0925 Symcd.sys (4.00.00.06) YES YES XM-5301B A01 4X XM5301TA1895 Cdrom.sys (3.03.04) YES YES XM-5301B A01 4X XM5301TA1895 Symcd.sys (4.00.00.06) YES YES Procedure: Based on the matrix above please follow either step A for installing the CDROM.SYS driver or step B for installing the SYMCD.SYS driver. Step A: Copy the CDROM.SYS driver into the same directory as the MINICAM.SYS driver. Please use the following statements in the CONFIG.SYS and AUTOEXEC.BAT files. CONFIG.SYS device=c:\dos\himem.sys /testmem:off device=c:\dos\emm386.exe /d=64 devicehigh=c:\proscsi\minicam.sys /ramcopy devicehigh=c:\proscsi\cdrom.sys /d:procd01 . AUTOEXEC.BAT lh c:\dos\mscdex.exe /d:procd01 /v Note: Replace \PROSCSI with the name of the subdirectory where the MINICAM.SYS and CDROM.SYS files reside. Step B: Copy the SYMCD.SYS driver into the same directory as the MINICAM.SYS driver. Please use the following statements in the CONFIG.SYS and AUTOEXEC.BAT files. CONFIG.SYS device=c:\dos\himem.sys /testmem:off device=c:\dos\emm386.exe /d=64 devicehigh=c:\proscsi\minicam.sys /ramcopy devicehigh=c:\proscsi\aspicam.sys devicehigh=c:\proscsi\symcd.sys /d:procd01 . AUTOEXEC.BAT lh c:\dos\mscdex.exe /d:procd01 /v Note: Replace \PROSCSI with the name of the subdirectory where the MINICAM.SYS and CDROM.SYS files reside.